Pine Bevel Architrave Lengths Pine Bevel Architrave Lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bevel Door Architrave Sets
Pine Bevel Door Architrave Sets Our Pine Bevel Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bevel Skirting 3.5 metre Our Pine Bevel Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bromley Architrave Lengths
Pine Bromley Architrave Lengths Pine Bromley Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Bromley Door Architrave Sets
Pine Bromley Door Architrave Sets Our Pine Bromley Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bromley Skirting 3.5 metre
Pine Bromley Skirting 3.5 metre Our Pine Bromley Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Architrave Lengths
Pine Bullnose Architrave Lengths Pine Bullnose Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Bullnose Door Architrave Sets
Pine Bullnose Door Architrave Sets Our Pine Bullnose Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Double Edge Architrave Lengths
Pine Bullnose Double Edge Architrave Lengths Pine Bullnose Double Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Double Edge Door Architrave Sets
Pine Bullnose Double Edge Door Architrave Sets Our Pine Bullnose Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Double Edge Skirting 3.5 metre
Pine Bullnose Double Edge Skirting 3.5 metre Our Pine Bullnose Double Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Single Edge Architrave Lengths
Pine Bullnose Single Edge Architrave Lengths Pine Bullnose Single Edge Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Bullnose Single Edge Door Architrave Sets
Pine Bullnose Single Edge Door Architrave Sets Our Pine Bullnose Single Edge Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Single Edge Skirting 3.5 metre
Pine Bullnose Single Edge Skirting 3.5 metre Our Pine Bullnose Single Edge Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Single Groove Architrave Lengths
Pine Bullnose Single Groove Architrave Lengths Pine Bullnose Single Groove Architrave Lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Single Groove Door Architrave Sets
Pine Bullnose Single Groove Door Architrave Sets Our Pine Bullnose Single Groove Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Single Groove Skirting 3.5 metre
Pine Bullnose Single Groove Skirting 3.5 metre Our Pine Bullnose Single Groove Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Skirting 3.5 metre
Pine Bullnose Skirting 3.5 metre Our Pine Bullnose Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Cambridge Architrave Lengths
Pine Cambridge Architrave Lengths Pine Cambridge Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Cambridge Door Architrave Sets
Pine Cambridge Door Architrave Sets Our Pine Cambridge Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Cambridge Skirting 3.5 metre
Pine Cambridge Skirting 3.5 metre Our Pine Cambridge Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Architrave Lengths
Pine Chamfered Architrave Lengths Pine Chamfered Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Door Architrave Sets
Pine Chamfered Door Architrave Sets Our Pine Chamfered Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Double Edge Architrave Lengths
Pine Chamfered Double Edge Architrave Lengths Pine Chamfered Double Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Double Edge Door Architrave Sets
Pine Chamfered Double Edge Door Architrave Sets Our Pine Chamfered Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Double Edge Skirting 3.5 metre
Pine Chamfered Double Edge Skirting 3.5 metre Our Pine Chamfered Double Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Single Edge Architrave Lengths
Pine Chamfered Single Edge Architrave Lengths Pine Chamfered Single Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Single Edge Door Architrave Sets
Pine Chamfered Single Edge Door Architrave Sets Our Pine Chamfered Single Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Single Edge Skirting 3.5 metre
Pine Chamfered Single Edge Skirting 3.5 metre Our Pine Chamfered Single Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Skirting 3.5 metre
Pine Chamfered Skirting 3.5 metre Our Pine Chamfered Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Triple Edge Architrave Lengths
Pine Chamfered Triple Edge Architrave Lengths Pine Chamfered Triple Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Triple Edge Door Architrave Sets
Pine Chamfered Triple Edge Door Architrave Sets Our Pine Chamfered Triple Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Triple Edge Skirting 3.5 metre
Pine Chamfered Triple Edge Skirting 3.5 metre Our Pine Chamfered Triple Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Cromwell Architrave Lengths
Pine Cromwell Architrave Lengths Pine Cromwell Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Cromwell Door Architrave Sets
Pine Cromwell Door Architrave Sets Our Pine Cromwell Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Cromwell Skirting 3.5 Metre
Pine Cromwell Skirting 3.5 Metre Our Pine Cromwell Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Flute Architrave Lengths Pine Flute Architrave Lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Flute Door Architrave Sets
Pine Flute Door Architrave Sets Our Pine Flute Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Flute Skirting 3.5 metre Our Pine Flute Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Henley Architrave Lengths
Pine Henley Architrave Lengths Pine Henley Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Henley Door Architrave Sets
Pine Henley Door Architrave Sets Our Pine Henley Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Henley Skirting 3.5 metre
Pine Henley Skirting 3.5 metre Our Pine Henley Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Heritage Architrave Lengths
Pine Heritage Architrave Lengths Pine Heritage Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Heritage Door Architrave Sets
Pine Heritage Door Architrave Sets Our Pine Heritage Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Heritage Skirting 3.5 metre
Pine Heritage Skirting 3.5 metre Our Pine Heritage Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Hove Architrave Lengths Pine Hove Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Hove Door Architrave Sets
Pine Hove Door Architrave Sets Our Pine Hove Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Hove Skirting 3.5 metre Our Pine Hove Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Knightsbridge Architrave Lengths
Pine Knightsbridge Architrave Lengths Pine Knightsbridge Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Knightsbridge Door Architrave Sets
Pine Knightsbridge Door Architrave Sets Our Pine Knightsbridge Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Knightsbridge Skirting 3.5 metre
Pine Knightsbridge Skirting 3.5 metre Our Pine Knightsbridge Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Lambs Tongue Architrave Lengths
Pine Lambs Tongue Architrave Lengths Pine Lambs Tongue Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Lambs Tongue Door Architrave Sets
Pine Lambs Tongue Door Architrave Sets Our Pine Lambs Tongue Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Lambs Tongue Skirting 3.5 metre
Pine Lambs Tongue Skirting 3.5 metre Our Pine Lambs Tongue Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Long Chamfer Architrave Lengths
Pine Long Chamfer Architrave Lengths Pine Long Chamfer Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Long Chamfer Door Architrave Sets
Pine Long Chamfer Door Architrave Sets Our Pine Long Chamfer Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Long Chamfer Skirting 3.5 metre
Pine Long Chamfer Skirting 3.5 metre Our Pine Long Chamfer Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Mini Chamfered Architrave Lengths
Pine Mini Chamfered Architrave Lengths Pine Mini Chamfered Architrave Lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Mini Chamfered Door Architrave Sets
Pine Mini Chamfered Door Architrave Sets Our Pine Mini Chamfered Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Mini Chamfered Skirting 3.5 metre
Pine Mini Chamfered Skirting 3.5 metre Our Pine Mini Chamfered Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Ogee Architrave Lengths Pine Ogee Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Ogee Door Architrave Sets
Pine Ogee Door Architrave Sets Our Pine Ogee Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Ogee Skirting 3.5 metre Our Pine Ogee Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Orchard Architrave Lengths
Pine Orchard Architrave Lengths Pine Orchard Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Orchard Door Architrave Sets
Pine Orchard Door Architrave Sets Our Pine Orchard Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Orchard Skirting 3.5 metre
Pine Orchard Skirting 3.5 metre Our Pine Orchard Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Ovolo Architrave Lengths Pine Ovolo Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Ovolo Door Architrave Sets
Pine Ovolo Door Architrave Sets Our Pine Ovolo Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Ovolo Skirting 3.5 metre Our Pine Ovolo Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Pencil Round Architrave Lengths
Pine Pencil Round Architrave Lengths Pine Pencil Round Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Pencil Round Door Architrave Sets
Pine Pencil Round Door Architrave Sets Our Pine Pencil Round Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Pencil Round Skirting 3.5 metre
Pine Pencil Round Skirting 3.5 metre Our Pine Pencil Round Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Regent Architrave Lengths
Pine Regent Architrave Lengths Pine Regent Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Regent Door Architrave Sets
Pine Regent Door Architrave Sets Our Pine Regent Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Regent Skirting 3.5 metre
Pine Regent Skirting 3.5 metre Our Pine Regent Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Architrave Lengths
Pine Scotia Architrave Lengths Pine Scotia Architrave Lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Door Architrave Sets
Pine Scotia Door Architrave Sets Our Pine Scotia Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Skirting 3.5 metre
Pine Scotia Skirting 3.5 metre Our Pine Scotia Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Double Edge Architrave Lengths
Pine Square Double Edge Architrave Lengths Pine Square Double Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Double Edge Door Architrave Sets
Pine Square Double Edge Door Architrave Sets Our Pine Square Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Double Edge Skirting 3.5 metre
Pine Square Double Edge Skirting 3.5 metre Our Pine Square Double Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Edge Architrave Lengths
Pine Square Edge Architrave Lengths Pine Square Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Edge Door Architrave Sets
Pine Square Edge Door Architrave Sets Our Pine Square Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Edge Skirting 3.5 metre
Pine Square Edge Skirting 3.5 metre Our Pine Square Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Single Edge Architrave Lengths
Pine Square Single Edge Architrave Lengths Pine Square Single Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Single Edge Door Architrave Sets
Pine Square Single Edge Door Architrave Sets Our Pine Square Single Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Single Edge Skirting 3.5 metre
Pine Square Single Edge Skirting 3.5 metre Our Pine Square Single Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Triple Edge Architrave Lengths
Pine Square Triple Edge Architrave Lengths Pine Square Triple Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Triple Edge Door Architrave Sets
Pine Square Triple Edge Door Architrave Sets Our Pine Square Triple Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Triple Edge Skirting 3.5 metre
Pine Square Triple Edge Skirting 3.5 metre Our Pine Square Triple Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Torus Architrave Lengths Pine Torus Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Torus Door Architrave Sets
Pine Torus Door Architrave Sets Our Pine Torus Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Torus Skirting 3.5 metre Our Pine Torus Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Truro Architrave Lengths Pine Truro Architrave Lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Truro Door Architrave Sets
Pine Truro Door Architrave Sets Our Pine Truro Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Truro Skirting 3.5 metre Our Pine Truro Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Tudor Architrave Lengths Pine Tudor Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Tudor Door Architrave Sets
Pine Tudor Architrave Sets Our Pine Tudor Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Tudor Skirting 3.5 metre Our Pine Tudor Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Tulip Architrave Lengths Pine Tulip Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Tulip Door Architrave Sets
Pine Tulip Door Architrave Sets Our Pine Tulip Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Tulip Skirting 3.5 metre Our Pine Tulip Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Warwick Architrave Lengths
Pine Warwick Architrave Lengths Pine Warwick Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Warwick Door Architrave Sets
Pine Warwick Door Architrave Sets Our Pine Warwick Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Warwick Skirting 3.5 metre
Pine Warwick Skirting 3.5 metre Our Pine Warwick Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Wells Architrave Lengths Pine Wells Architrave Lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Wells Door Architrave Sets
Pine Wells Door Architrave Sets Our Pine Wells Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)• Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Wells Skirting 3.5 metre Our Pine Wells Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Winchester Architrave Lengths
Pine Winchester Architrave Lengths Pine Winchester Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Winchester Door Architrave Sets
Pine Winchester Door Architrave Sets Our Pine Winchester Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Winchester Skirting 3.5 metre
Pine Winchester Skirting 3.5 metre Our Pine Winchester Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Windsor Architrave Lengths
Pine Windsor Architrave Lengths Pine Windsor Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Windsor Door Architrave Sets
Pine Windsor Door Architrave Sets Our Pine Windsor Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Windsor Skirting 3.5 metre
Pine Windsor Skirting 3.5 metre Our Pine Windsor Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bevel Architrave Lengths
Solid Ash Bevel Architrave Lengths Solid Ash Bevel Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bromley Architrave Lengths
Solid Ash Bromley Architrave Lengths Solid Ash Bromley Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Bullnose Architrave Lengths
Solid Ash Bullnose Architrave Lengths Solid Ash Bullnose Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Bullnose Double Edge Architrave Lengths
Solid Ash Bullnose Double Edge Architrave Lengths Solid Ash Bullnose Double Edge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bullnose Single Edge Architrave Lengths
Solid Ash Bullnose Single Edge Architrave Lengths Solid Ash Bullnose Single Edge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bullnose Single Groove Architrave Lengths
Solid Ash Bullnose Single Groove Architrave Lengths Solid Ash Bullnose Single Groove Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Cambridge Architrave Lengths
Solid Ash Cambridge Architrave Lengths Solid Ash Cambridge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Chamfered Architrave Lengths
Solid Ash Chamfered Architrave Lengths Solid Ash Chamfered Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Chamfered Double Edge Architrave Lengths
Solid Ash Chamfered Double Edge Architrave Lengths Solid Ash Chamfered Double Edge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Chamfered Triple Edge Architrave Lengths
Solid Ash Chamfered Triple Edge Architrave Lengths Solid Ash Chamfered Triple Edge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Cromwell Architrave Lengths
Solid Ash Cromwell Architrave Lengths Solid Ash Cromwell Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Flute Architrave Lengths
Solid Ash Flute Architrave Lengths Solid Ash Flute Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Henley Architrave Lengths
Solid Ash Henley Architrave Lengths Solid Ash Henley Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Heritage Architrave Lengths
Solid Ash Heritage Architrave Lengths Solid Ash Heritage Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Hove Architrave Lengths
Solid Ash Hove Architrave Lengths Solid Ash Hove Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Knightsbridge Architrave Lengths
Solid Ash Knightsbridge Architrave Lengths Solid Ash Knightsbridge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Lambs Tongue Architrave Lengths
Solid Ash Lambs Tongue Architrave Lengths Solid Ash Lambs Tongue Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Long Chamfer Architrave Lengths
Solid Ash Long Chamfer Architrave Lengths Solid Ash Long Chamfer Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Mini Chamfered Architrave Lengths
Solid Ash Mini Chamfered Architrave Lengths Solid Ash Mini Chamfered Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Ogee Architrave Lengths
Solid Ash Ogee Architrave Lengths Solid Ash Ogee Architrave lengths are manufactured from the finest quality North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Orchard Architrave Lengths
Solid Ash Orchard Architrave Lengths Solid Ash Orchard Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Ovolo Architrave Lengths
Solid Ash Ovolo Architrave Lengths Solid Ash Ovolo Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Pencil Round Architrave Lengths
Solid Ash Pencil Round Architrave Lengths Solid Ash Pencil Round Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Regent Architrave Lengths
Solid Ash Regent Architrave Lengths Solid Ash Regent Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Scotia Architrave Lengths
Solid Ash Scotia Architrave Lengths Solid Ash Scotia Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Square Double Edge Architrave Lengths
Solid Ash Square Double Edge Architrave Lengths Solid Ash Square Double Edge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Square Edge Architrave Lengths
Solid Ash Square Edge Architrave Lengths Solid Ash Square Edge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Square Single Edge Architrave Lengths
Solid Ash Square Single Edge Architrave Lengths Solid Ash Square Single Edge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Square Triple Edge Architrave Lengths
Solid Ash Square Triple Edge Architrave Lengths Solid Ash Square Triple Edge Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Torus Architrave Lengths
Solid Ash Torus Architrave Lengths Solid Ash Torus Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Truro Architrave Lengths
Solid Ash Truro Architrave Lengths Solid Ash Truro Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Tulip Architrave Lengths
Solid Ash Tulip Architrave Lengths Solid Ash Tulip Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Warwick Architrave Lengths
Solid Ash Warwick Architrave Lengths Solid Ash Warwick Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Wells Architrave Lengths
Solid Ash Wells Architrave Lengths Solid Ash Wells Architrave lengths are manufactured from the finest quality North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Winchester Architrave Lengths
Solid Ash Winchester Architrave Lengths Solid Ash Winchester Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Ash Windsor Architrave Lengths
Solid Ash Windsor Architrave Lengths Solid Ash Windsor Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Bevel Architrave Lengths
Solid Beech Bevel Architrave Lengths Solid Beech Bevel Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bevel Skirting 3 metre
Solid Beech Bevel Skirting 3 metre Our Solid Beech Bevel Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bromley Architrave Lengths
Solid Beech Bromley Architrave Lengths Solid Beech Bromley Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Bromley Skirting 3 metre
Solid Beech Bromley Skirting 3 metre Our Solid Beech Bromley Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Architrave Lengths
Solid Beech Bullnose Architrave Lengths Solid Beech Bullnose Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Bullnose Double Edge Architrave Lengths
Solid Beech Bullnose Double Edge Architrave Lengths Solid Beech Bullnose Double Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Double Edge Skirting 3 metre
Solid Beech Bullnose Double Edge Skirting 3 metre Our Solid Beech Bullnose Double Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Single Edge Architrave Lengths
Solid Beech Bullnose Single Edge Architrave Lengths Solid Beech Bullnose Single Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Single Edge Skirting 3 metre
Solid Beech Bullnose Single Edge Skirting 3 metre Our Solid Beech Bullnose Single Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Single Groove Architrave Lengths
Solid Beech Bullnose Single Groove Architrave Lengths Solid Beech Bullnose Single Groove Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Single Groove Skirting 3 metre
Solid Beech Bullnose Single Groove Skirting 3 metre Our Solid Beech Bullnose Single Groove Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Skirting 3 metre
Solid Beech Bullnose Skirting 3 metre Our Solid Beech Bullnose Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Cambridge Architrave Lengths
Solid Beech Cambridge Architrave Lengths Solid Beech Cambridge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Cambridge Skirting 3 metre
Solid Beech Cambridge Skirting 3 metre Our Solid Beech Cambridge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Architrave Lengths
Solid Beech Chamfered Architrave Lengths Solid Beech Chamfered Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Double Edge Architrave Lengths
Solid Beech Chamfered Double Edge Architrave Lengths Solid Beech Chamfered Double Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Double Edge Skirting 3 metre
Solid Beech Chamfered Double Edge Skirting 3 metre Our Solid Beech Chamfered Double Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Single Edge Architrave Lengths
Solid Beech Chamfered Single Edge Architrave Lengths Solid Walnut Chamfered Single Edge Architrave lengths are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Single Edge Skirting 3 metre
Solid Beech Chamfered Single Edge Skirting 3 metre Our Solid Beech Chamfered Single Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Skirting 3 metre
Solid Beech Chamfered Skirting 3 metre Our Solid Beech Chamfered Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Triple Edge Architrave Lengths
Solid Beech Chamfered Triple Edge Architrave Lengths Solid Beech Chamfered Triple Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Cromwell Architrave Lengths
Solid Beech Cromwell Architrave Lengths Solid Beech Cromwell Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Cromwell Skirting 3 metre
Solid Beech Cromwell Skirting 3 metre Our Solid Beech Cromwell Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Flute Architrave Lengths
Solid Beech Flute Architrave Lengths Solid Beech Flute Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Flute Skirting 3 metre
Solid Beech Flute Skirting 3 metre Our Solid Beech Flute Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Henley Architrave Lengths
Solid Beech Henley Architrave Lengths Solid Beech Henley Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Henley Skirting 3 metre
Solid Beech Henley Skirting 3 metre Our Solid Beech Henley Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Heritage Architrave Lengths
Solid Beech Heritage Architrave Lengths Solid Beech Heritage Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Heritage Skirting 3 metre
Solid Beech Heritage Skirting 3 metre Our Solid Beech Heritage Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Hove Architrave Lengths
Solid Beech Hove Architrave Lengths Solid Beech Hove Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Hove Skirting 3 metre
Solid Beech Hove Skirting 3 metre Our Solid Beech Hove Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Knightsbridge Architrave Lengths
Solid Beech Knightsbridge Architrave Lengths Solid Beech Knightsbridge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Knightsbridge Skirting 3 metre
Solid Beech Knightsbridge Skirting 3 metre Our Solid Beech Knightsbridge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Lambs Tongue Architrave Lengths
Solid Beech Lambs Tongue Architrave Lengths Solid Beech Lambs Tongue Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Lambs Tongue Skirting 3 metre
Solid Beech Lambs Tongue Skirting 3 metre Our Solid Beech Lambs Tongue Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Long Chamfer Architrave Lengths
Solid Beech Long Chamfer Architrave Lengths Solid Beech Long Chamfer Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Long Chamfer Skirting 3 metre
Solid Beech Long Chamfer Skirting 3 metre Our Solid Beech Long Chamfer Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Mini Chamfered Architrave Lengths
Solid Beech Mini Chamfered Architrave Lengths Solid Beech Mini Chamfered Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Mini Chamfered Skirting 3 metre
Solid Beech Mini Chamfered Skirting 3 metre Our Solid Beech Mini Chamfered Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image. • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Ogee Architrave Lengths
Solid Beech Ogee Architrave Lengths Solid Beech Ogee Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Ogee Skirting 3 metre
Solid Beech Ogee Skirting 3 metre Our Solid Beech Ogee Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Orchard Architrave Lengths
Solid Beech Orchard Architrave Lengths Solid Beech Orchard Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Orchard Skirting 3 metre
Solid Beech Orchard Skirting 3 metre Our Solid Beech Orchard Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Ovolo Architrave Lengths
Solid Beech Ovolo Architrave Lengths Solid Beech Ovolo Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Ovolo Skirting 3 metre
Solid Beech Ovolo Skirting 3 metre Our Solid Beech Ovolo Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Pencil Round Architrave Lengths
Solid Beech Pencil Round Architrave Lengths Solid Beech Pencil Round Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Pencil Round Skirting 3 metre
Solid Beech Pencil Round Skirting 3 metre Our Solid Beech Pencil Round Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Regent Architrave Lengths
Solid Beech Regent Architrave Lengths Solid Beech Regent Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Regent Skirting 3 metre
Solid Beech Regent Skirting 3 metre Our Solid Beech Regent Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Scotia Architrave Lengths
Solid Beech Scotia Architrave Lengths Solid Beech Scotia Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Scotia Skirting 3 metre
Solid Beech Scotia Skirting 3 metre Our Solid Beech Scotia Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Double Edge Architrave Lengths
Solid Beech Square Double Edge Architrave Lengths Solid Beech Square Double Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Double Edge Skirting 3 metre
Solid Beech Square Double Edge Skirting 3 metre Our Solid Beech Square Double Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Edge Architrave Lengths
Solid Beech Square Edge Architrave Lengths Solid Beech Square Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Edge Skirting 3 metre
Solid Beech Square Edge Skirting 3 metre Our Solid Beech Square Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Single Edge Architrave Lengths
Solid Beech Square Single Edge Architrave Lengths Solid Beech Square Single Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Single Edge Skirting 3 metre
Solid Beech Square Single Edge Skirting 3 metre Our Solid Beech Square Single Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Triple Edge Architrave Lengths
Solid Beech Square Triple Edge Architrave Lengths Solid Beech Square Triple Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Torus Architrave Lengths
Solid Beech Torus Architrave Lengths Solid Beech Torus Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Torus Skirting 3 metre
Solid Beech Torus Skirting 3 metre Our Solid Beech Torus Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Truro Architrave Lengths
Solid Beech Truro Architrave Lengths Solid Beech Truro Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Truro Skirting 3 metre
Solid Beech Truro Skirting 3 metre Our Solid Beech Truro Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Tudor Skirting 3 metre
Solid Beech Tudor Skirting 3 metre Our Solid Beech Tudor Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Tulip Architrave Lengths
Solid Beech Tulip Architrave Lengths Solid Beech Tulip Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Tulip Skirting 3 metre
Solid Beech Tulip Skirting 3 metre Our Solid Beech Tulip Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Warwick Architrave Lengths
Solid Beech Warwick Architrave Lengths Solid Beech Warwick Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Warwick Skirting 3 metre
Solid Beech Warwick Skirting 3 metre Our Solid Beech Warwick Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Wells Architrave Lengths
Solid Beech Wells Architrave Lengths Solid Beech Wells Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Wells Skirting 3 metre
Solid Beech Wells Skirting 3 metre Our Solid Beech Wells Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Winchester Architrave Lengths
Solid Beech Winchester Architrave Lengths Solid Beech Winchester Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Winchester Skirting 3 metre
Solid Beech Winchester Skirting 3 metre Our Solid Beech Winchester Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Windsor Architrave Lengths
Solid Beech Windsor Architrave Lengths Solid Beech Windsor Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Windsor Skirting 3 metre
Solid Beech Windsor Skirting 3 metre Our Solid Beech Windsor Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Bevel Skirting 2.7 metre
Solid Cherry Bevel Skirting 2.7 metre Our Solid Cherry Bevel Skirting 2.7 metre is manufactured from the finest quality North American Cherry and is part of our modern skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Bullnose Skirting 2.7 metre
Solid Cherry Bullnose Skirting 2.7 metre Our Solid Cherry Bullnose Skirting 2.7 metre is manufactured from the finest quality North American Cherry and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Chamfered Skirting 2.7 metre
Solid Cherry Chamfered Skirting 2.7 metre Our Solid Cherry Chamfered Skirting 2.7 metre is manufactured from the finest quality North American Cherry and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Long Chamfer Skirting 2.7 metre
Solid Cherry Long Chamfer Skirting 2.7 metre Our Solid Cherry Long Chamfer Skirting 2.7 metre is manufactured from the finest quality North American Cherry and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Mini Chamfered Skirting 2.7 metre
Solid Cherry Mini Chamfered Skirting 2.7 metre Our Solid Cherry Mini Chamfered Skirting 2.7 metre is manufactured from the finest quality North American Cherry and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Pencil Round Skirting 2.7 metre
Solid Cherry Pencil Round Skirting 2.7 metre Our Solid Cherry Pencil Round Skirting 2.7 metre is manufactured from the finest quality North American Cherry and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Square Edge Skirting 2.7 metre
Solid Cherry Square Edge Skirting 2.7 metre Our Solid Cherry Square Edge Skirting 2.7 metre is manufactured from the finest quality North American Cherry and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bevel Architrave Lengths
Solid Oak Bevel Architrave Lengths Solid Oak Bevel Architrave lengths are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bullnose Double Edge Architrave Lengths
Solid Oak Bullnose Double Edge Architrave Lengths Solid Oak Bullnose Double Edge Architrave lengths are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bullnose Single Edge Architrave Lengths
Solid Oak Bullnose Single Edge Architrave Lengths Solid Oak Bullnose Single Edge Architrave lengths are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bullnose Single Groove Architrave Lengths
Solid Oak Bullnose Single Groove Architrave Lengths Solid Oak Bullnose Single Groove Architrave lengths are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Chamfered Architrave Lengths
Solid Oak Chamfered Architrave Lengths Solid Oak Chamfered Architrave lengths are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Chamfered Double Edge Architrave Lengths
Solid Oak Chamfered Double Edge Architrave Lengths Solid Oak Chamfered Double Edge Architrave lengths are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Bevel Architrave Lengths
Solid Sapele Bevel Architrave Lengths Solid Sapele Bevel Architrave lengths are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Bevel Skirting 3 metre
Solid Sapele Bevel Skirting 3 metre Our Solid Sapele Bevel Skirting is manufactured from the finest quality Solid African Sapele and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Bullnose Architrave Lengths
Solid Sapele Bullnose Architrave Lengths Solid Sapele Bullnose Architrave lengths are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Sapele Bullnose Skirting 3 metre
Solid Sapele Bullnose Skirting 3 metre Our Solid Sapele Bullnose Skirting is manufactured from the finest quality Solid African Sapele and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Chamfered Architrave Lengths
Solid Sapele Chamfered Architrave Lengths Solid Sapele Chamfered Architrave lengths are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Chamfered Skirting 3 metre
Solid Sapele Chamfered Skirting 3 metre Our Solid Sapele Chamfered Skirting is manufactured from the finest quality Solid African Sapele and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Long Chamfer Architrave Lengths
Solid Sapele Long Chamfer Architrave Lengths Solid Sapele Long Chamfer Architrave lengths are manufactured from the finest quality Solid African Sapele and is part of our Traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Sapele Long Chamfer Skirting 3 metre
Solid Sapele Long Chamfer Skirting 3 metre Our Solid Sapele Long Chamfer Skirting is manufactured from the finest quality Solid African Sapele and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Mini Chamfered Architrave Lengths
Solid Sapele Mini Chamfered Architrave Lengths Solid Sapele Mini Chamfered Architrave lengths are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Mini Chamfered Skirting 3 metre
Solid Sapele Mini Chamfered Skirting 3 metre Our Solid Sapele Mini Chamfered Skirting is manufactured from the finest quality Solid African Sapele and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Pencil Round Architrave Lengths
Solid Sapele Pencil Round Architrave Lengths Solid Sapele Pencil Round Architrave lengths are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Pencil Round Skirting 3 metre
Solid Sapele Pencil Round Skirting 3 metre Our Solid Sapele Pencil Round Skirting is manufactured from the finest quality Solid African Sapele and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Square Edge Architrave Lengths
Solid Sapele Square Edge Architrave Lengths Solid Sapele Square Edge Architrave lengths are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Square Edge Skirting 3 metre
Solid Sapele Square Edge Skirting 3 metre Our Solid Sapele Square Edge Skirting is manufactured from the finest quality Solid African Sapele and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.