Solid Maple PAR Timber 145mm Wide
Solid Maple PAR Timber 145mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 145mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 100mm x 7mm
Solid Maple Flat Square Edge Beading Strip 100mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 100mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 110mm x 7mm
Solid Maple Flat Square Edge Beading Strip 110mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 110mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 120mm x 7mm
Solid Maple Flat Square Edge Beading Strip 120mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 120mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 130mm x 7mm
Solid Maple Flat Square Edge Beading Strip 130mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 130mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 140mm x 7mm
Solid Maple Flat Square Edge Beading Strip 140mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 140mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 40mm x 5mm
Solid Maple Flat Square Edge Beading Strip 40mm x 5mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 5mm • Width: 40mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 50mm x 7mm
Solid Maple Flat Square Edge Beading Strip 50mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 50mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 60mm x 7mm
Solid Maple Flat Square Edge Beading Strip 60mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 60mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 70mm x 7mm
Solid Maple Flat Square Edge Beading Strip 70mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 70mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 80mm x 7mm
Solid Maple Flat Square Edge Beading Strip 80mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 80mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flat Square Edge Beading Strip 90mm x 7mm
Solid Maple Flat Square Edge Beading Strip 90mm x 7mm Solid Maple Flat Square Edge Beading Strip manufactured from the finest quality North American Maple and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length • Thickness: 7mm • Width: 90mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face and the 2 small sides • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 100mm Wide
Solid Maple PAR Timber 100mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 100mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 105mm Wide
Solid Maple PAR Timber 105mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 105mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 110mm Wide
Solid Maple PAR Timber 110mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 110mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 115mm Wide
Solid Maple PAR Timber 115mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 115mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 120mm Wide
Solid Maple PAR Timber 120mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 120mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 125mm Wide
Solid Maple PAR Timber 125mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 125mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 130mm Wide
Solid Maple PAR Timber 130mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 130mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 135mm Wide
Solid Maple PAR Timber 135mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 135mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 140mm Wide
Solid Maple PAR Timber 140mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 140mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 30mm Wide
Solid Maple PAR Timber 30mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 30mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 35mm Wide
Solid Maple PAR Timber 35mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 35mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 40mm Wide
Solid Maple PAR Timber 40mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 40mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 45mm Wide
Solid Maple PAR Timber 45mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 45mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 50mm Wide
Solid Maple PAR Timber 50mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 50mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 55mm Wide
Solid Maple PAR Timber 55mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 55mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 60mm Wide
Solid Maple PAR Timber 60mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 60mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 65mm Wide
Solid Maple PAR Timber 65mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 65mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 69mm Wide
Solid Maple PAR Timber 69mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 69mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 75mm Wide
Solid Maple PAR Timber 75mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 75mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 80mm Wide
Solid Maple PAR Timber 80mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 80mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 85mm Wide
Solid Maple PAR Timber 85mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 85mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 90mm Wide
Solid Maple PAR Timber 90mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 90mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple PAR Timber 95mm Wide
Solid Maple PAR Timber 95mm Wide Solid Maple PAR Timber manufactured from the finest quality North American Maple. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm • Width: 95mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Scotia Beading 19mm x 19mm
Solid Maple Scotia Beading 19mm x 19mm Solid Maple Scotia Beading manufactured from the finest quality North American Maple and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length • Profile Height: 19mm • Profile Depth: 19mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Scotia Beading 22mm x 22mm
Solid Maple Scotia Beading 22mm x 22mm Solid Maple Scotia Beading manufactured from the finest quality North American Maple and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length • Profile Height: 22mm • Profile Depth: 22mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.