Pine Bevel Door Architrave Sets
Pine Bevel Architrave Sets Pine Bevel Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Double Edge Door Architrave Sets
Pine Bullnose Double Edge Architrave Sets Pine Bullnose Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Single Groove Door Architrave Sets
Pine Bullnose Single Groove Architrave Sets Pine Bullnose Single Groove Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Door Architrave Sets
Pine Chamfered Architrave Sets Pine Chamfered Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Double Edge Door Architrave Sets
Pine Chamfered Double Edge Architrave Sets Pine Chamfered Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Single Edge Door Architrave Sets
Pine Chamfered Single Edge Architrave Sets Pine Chamfered Single Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Chamfered Triple Edge Door Architrave Sets
Pine Chamfered Triple Edge Architrave Sets Pine Chamfered Triple Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Flute Door Architrave Sets
Pine Flute Architrave Sets Pine Flute Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Mini Chamfered Door Architrave Sets
Pine Mini Chamfered Architrave Sets Pine Mini Chamfered Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Pencil Round Door Architrave Sets
Pine Pencil Round Architrave Sets Pine Pencil Round Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Door Architrave Sets
Pine Scotia Architrave Sets Pine Scotia Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Double Edge Door Architrave Sets
Pine Square Double Edge Architrave Sets Pine Square Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Edge Door Architrave Sets
Pine Square Edge Architrave Sets Pine Square Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Single Edge Door Architrave Sets
Pine Square Single Edge Architrave Sets Pine Square Single Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Triple Edge Door Architrave Sets
Pine Square Triple Edge Architrave Sets Pine Square Triple Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Truro Door Architrave Sets
Pine Truro Architrave Sets Pine Truro Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Wells Door Architrave Sets
Pine Wells Architrave Sets Pine Wells Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)• Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bevel Architrave Sets
Solid Ash Bevel Architrave Sets Solid Ash Bevel Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bullnose Double Edge Architrave Sets
Solid Ash Bullnose Double Edge Architrave Sets Solid Ash Bullnose Double Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bullnose Single Edge Architrave Sets
Solid Ash Bullnose Single Edge Architrave Sets Solid Ash Bullnose Single Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bullnose Single Groove Architrave Sets
Solid Ash Bullnose Single Groove Architrave Sets Solid Ash Bullnose Single Groove Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Chamfered Architrave Sets
Solid Ash Chamfered Architrave Sets Solid Ash Chamfered Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Chamfered Double Edge Architrave Sets
Solid Ash Chamfered Double Edge Architrave Sets Solid Ash Chamfered Double Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Chamfered Single Edge Architrave Sets
Solid Ash Chamfered Single Edge Architrave Sets Solid Ash Chamfered Single Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Chamfered Triple Edge Architrave Sets
Solid Ash Chamfered Triple Edge Architrave Sets Solid Ash Chamfered Triple Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Flute Architrave Sets
Solid Ash Flute Architrave Sets Solid Ash Flute Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Mini Chamfered Architrave Sets
Solid Ash Mini Chamfered Architrave Sets Solid Ash Mini Chamfered Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Pencil Round Architrave Sets
Solid Ash Pencil Round Architrave Sets Solid Ash Pencil Round Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Scotia Architrave Sets
Solid Ash Scotia Architrave Sets Solid Ash Scotia Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Square Double Edge Architrave Sets
Solid Ash Square Double Edge Architrave Sets Solid Ash Square Double Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Square Edge Architrave Sets
Solid Ash Square Edge Architrave Sets Solid Ash Square Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Square Single Edge Architrave Sets
Solid Ash Square Single Edge Architrave Sets Solid Ash Square Single Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Square Triple Edge Architrave Sets
Solid Ash Square Triple Edge Architrave Sets Solid Ash Square Triple Edge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Truro Architrave Sets
Solid Ash Truro Architrave Sets Solid Ash Truro Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Wells Architrave Sets
Solid Ash Wells Architrave Sets Solid Ash Wells Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bevel Architrave Sets
Solid Beech Bevel Architrave Sets Solid Beech Bevel Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Double Edge Architrave Sets
Solid Beech Bullnose Double Edge Architrave Sets Solid Beech Bullnose Double Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Single Edge Architrave Sets
Solid Beech Bullnose Single Edge Architrave Sets Solid Beech Bullnose Single Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Single Groove Architrave Sets
Solid Beech Bullnose Single Groove Architrave Sets Solid Beech Bullnose Single Groove Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Architrave Sets
Solid Beech Chamfered Architrave Sets Solid Beech Chamfered Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Double Edge Architrave Sets
Solid Beech Chamfered Double Edge Architrave Sets Solid Beech Chamfered Double Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Single Edge Architrave Sets
Solid Beech Chamfered Single Edge Architrave Sets Solid Beech Chamfered Single Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Chamfered Triple Edge Architrave Sets
Solid Beech Chamfered Triple Edge Architrave Sets Solid Beech Chamfered Triple Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Flute Architrave Sets
Solid Beech Flute Architrave Sets Solid Beech Flute Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Mini Chamfered Architrave Sets
Solid Beech Mini Chamfered Architrave Sets Solid Beech Mini Chamfered Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Pencil Round Architrave Sets
Solid Beech Pencil Round Architrave Sets Solid Beech Pencil Round Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Scotia Architrave Sets
Solid Beech Scotia Architrave Sets Solid Beech Scotia Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Double Edge Architrave Sets
Solid Beech Square Double Edge Architrave Sets Solid Beech Square Double Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Edge Architrave Sets
Solid Beech Square Edge Architrave Sets Solid Beech Square Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Single Edge Architrave Sets
Solid Beech Square Single Edge Architrave Sets Solid Beech Square Single Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Square Triple Edge Architrave Sets
Solid Beech Square Triple Edge Architrave Sets Solid Beech Square Triple Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Truro Architrave Sets
Solid Beech Truro Architrave Sets Solid Beech Truro Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Wells Architrave Sets
Solid Beech Wells Architrave Sets Solid Beech Wells Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Bevel Architrave Sets
Solid Cherry Bevel Architrave Sets Solid Cherry Bevel Architrave sets are manufactured from the finest quality North American Cherry and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Chamfered Architrave Sets
Solid Cherry Chamfered Architrave Sets Solid Cherry Chamfered Architrave sets are manufactured from the finest quality North American Cherry and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Mini Chamfered Architrave Sets
Solid Cherry Mini Chamfered Architrave Sets Solid Cherry Mini Chamfered Architrave sets are manufactured from the finest quality North American Cherry and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Pencil Round Architrave Sets
Solid Cherry Pencil Round Architrave Sets Solid Cherry Pencil Round Architrave sets are manufactured from the finest quality North American Cherry and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Square Edge Architrave Sets
Solid Cherry Square Edge Architrave Sets Solid Cherry Square Edge Architrave sets are manufactured from the finest quality North American Cherry and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Bevel Architrave Sets
Solid Maple Bevel Architrave Sets Solid Maple Bevel Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Bullnose Double Edge Architrave Sets
Solid Maple Bullnose Double Edge Architrave Sets Solid Maple Bullnose Double Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Bullnose Single Edge Architrave Sets
Solid Maple Bullnose Single Edge Architrave Sets Solid Maple Bullnose Single Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Bullnose Single Groove Architrave Sets
Solid Maple Bullnose Single Groove Architrave Sets Solid Maple Bullnose Single Groove Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Chamfered Architrave Sets
Solid Maple Chamfered Architrave Sets Solid Maple Chamfered Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Chamfered Double Edge Architrave Sets
Solid Maple Chamfered Double Edge Architrave Sets Solid Maple Chamfered Double Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Chamfered Single Edge Architrave Sets
Solid Maple Chamfered Single Edge Architrave Sets Solid Maple Chamfered Single Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Chamfered Triple Edge Architrave Sets
Solid Maple Chamfered Triple Edge Architrave Sets Solid Maple Chamfered Triple Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Flute Architrave Sets
Solid Maple Flute Architrave Sets Solid Maple Flute Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Mini Chamfered Architrave Sets
Solid Maple Mini Chamfered Architrave Sets Solid Maple Mini Chamfered Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Pencil Round Architrave Sets
Solid Maple Pencil Round Architrave Sets Solid Maple Pencil Round Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Scotia Architrave Sets
Solid Maple Scotia Architrave Sets Solid Maple Scotia Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Square Double Edge Architrave Sets
Solid Maple Square Double Edge Architrave Sets Solid Maple Square Double Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Square Edge Architrave Sets
Solid Maple Square Edge Architrave Sets Solid Maple Square Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Square Single Edge Architrave Sets
Solid Maple Square Single Edge Architrave Sets Solid Maple Square Single Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Square Triple Edge Architrave Sets
Solid Maple Square Triple Edge Architrave Sets Solid Maple Square Triple Edge Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Truro Architrave Sets
Solid Maple Truro Architrave Sets Solid Maple Truro Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Wells Architrave Sets
Solid Maple Wells Architrave Sets Solid Maple Wells Architrave sets are manufactured from the finest quality North American Maple and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bevel Door Architrave Sets
Solid Oak Bevel Architrave Sets Solid Oak Bevel Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bullnose Double Edge Door Architrave Sets
Solid Oak Bullnose Double Edge Architrave Sets Solid Oak Bullnose Double Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bullnose Single Edge Door Architrave Sets
Solid Oak Bullnose Single Edge Architrave Sets Solid Oak Bullnose Single Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bullnose Single Groove Door Architrave Sets
Solid Oak Bullnose Single Groove Architrave Sets Solid Oak Bullnose Single Groove Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Chamfered Door Architrave Sets
Solid Oak Chamfered Architrave Sets Solid Oak Chamfered Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Chamfered Double Edge Door Architrave Sets
Solid Oak Chamfered Double Edge Architrave Sets Solid Oak Chamfered Double Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Chamfered Single Edge Door Architrave Sets
Solid Oak Chamfered Single Edge Architrave Sets Solid Oak Chamfered Single Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Chamfered Triple Edge Door Architrave Sets
Solid Oak Chamfered Triple Edge Architrave Sets Solid Oak Chamfered Triple Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Fluted Door Architrave Sets
Solid Oak Flute Architrave Sets Solid Oak Flute Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Mini Chamfered Door Architrave Sets
Solid Oak Mini Chamfered Architrave Sets Solid Oak Mini Chamfered Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Pencil Round Door Architrave Sets
Solid Oak Pencil Round Architrave Sets Solid Oak Pencil Round Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Scotia Door Architrave Sets
Solid Oak Scotia Architrave Sets Solid Oak Scotia Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Square Double Edge Door Architrave Sets
Solid Oak Square Double Edge Architrave Sets Solid Oak Square Double Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Square Edge Door Architrave Sets
Solid Oak Square Edge Architrave Sets Solid Oak Square Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Square Single Edge Door Architrave Sets
Solid Oak Square Single Edge Architrave Sets Solid Oak Square Single Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Square Triple Edge Door Architrave Sets
Solid Oak Square Triple Edge Architrave Sets Solid Oak Square Triple Edge Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Truro Door Architrave Sets
Solid Oak Truro Architrave Sets Solid Oak Truro Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Wells Door Architrave Sets
Solid Oak Wells Architrave Sets Solid Oak Wells Architrave sets are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Bevel Architrave Sets
Solid Sapele Bevel Architrave Sets Solid Sapele Bevel Architrave sets are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Chamfered Architrave Sets
Solid Sapele Chamfered Architrave Sets Solid Sapele Chamfered Architrave sets are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Mini Chamfered Architrave Sets
Solid Sapele Mini Chamfered Architrave Sets Solid Sapele Mini Chamfered Architrave sets are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Pencil Round Architrave Sets
Solid Sapele Pencil Round Architrave Sets Solid Sapele Pencil Round Architrave sets are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Square Edge Architrave Sets
Solid Sapele Square Edge Architrave Sets Solid Sapele Square Edge Architrave sets are manufactured from the finest quality Solid African Sapele and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Bevel Architrave Sets
Solid Walnut Bevel Architrave Sets Solid Walnut Bevel Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Bullnose Double Edge Architrave Sets
Solid Walnut Bullnose Double Edge Architrave Sets Solid Walnut Bullnose Double Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Bullnose Single Edge Architrave Sets
Solid Walnut Bullnose Single Edge Architrave Sets Solid Walnut Bullnose Single Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Bullnose Single Groove Architrave Sets
Solid Walnut Bullnose Single Groove Architrave Sets Solid Walnut Bullnose Single Groove Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Chamfered Architrave Sets
Solid Walnut Chamfered Architrave Sets Solid Walnut Chamfered Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Chamfered Double Edge Architrave Sets
Solid Walnut Chamfered Double Edge Architrave Sets Solid Walnut Chamfered Double Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Chamfered Single Edge Architrave Sets
Solid Walnut Chamfered Single Edge Architrave Sets Solid Walnut Chamfered Single Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Chamfered Triple Edge Architrave Sets
Solid Walnut Chamfered Triple Edge Architrave Sets Solid Walnut Chamfered Triple Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Flute Architrave Sets
Solid Walnut Flute Architrave Sets Solid Walnut Flute Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Mini Chamfered Architrave Sets
Solid Walnut Mini Chamfered Architrave Sets Solid Walnut Mini Chamfered Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Pencil Round Architrave Sets
Solid Walnut Pencil Round Architrave Sets Solid Walnut Pencil Round Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Scotia Architrave Sets
Solid Walnut Scotia Architrave Sets Solid Walnut Scotia Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Square Double Edge Architrave Sets
Solid Walnut Square Double Edge Architrave Sets Solid Walnut Square Double Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Square Edge Architrave Sets
Solid Walnut Square Edge Architrave Sets Solid Walnut Square Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Square Single Edge Architrave Sets
Solid Walnut Square Single Edge Architrave Sets Solid Walnut Square Single Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Square Triple Edge Architrave Sets
Solid Walnut Square Triple Edge Architrave Sets Solid Walnut Square Triple Edge Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Truro Architrave Sets
Solid Walnut Truro Architrave Sets Solid Walnut Truro Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Wells Architrave Sets
Solid Walnut Wells Architrave Sets Solid Walnut Wells Architrave sets are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door • Thickness: 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door • Product Image Information: CGI (Computer Generated Image) • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.