Solid Oak Internal Door Lining Sets - 20mm Thick

Solid Oak Internal Door Lining Sets - 20mm Thick Solid Oak 20mm Door Lining Sets are manufactured from the finest quality American Oak and is part of our door lining collection. Specification • Door Lining Thickness: 20mm • Width Options: 69mm - 95mm - 106mm - 119mm - 131mm - 138mm - 145mm - 169mm - 180mm - 195mm - 219mm• Door Size: The lining head is 1000mm on a Single Door opening and 2100mm on a Double Door opening. The head is untrenched and can be trenched to suit your door size by a professional fitter.   • Single Door Set: 2 x 2100mm & 1 x 1000mm pieces in each set also includes loose door stops   • Double Door Set: 3 x 2100mm pieces in each set also includes loose door stops   • Loose door stops included: Depth Options 69mm = 25mm x 12mm one side pencil round, 95mm to 219mm = 44mm x 12mm one side pencil round.   • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Lining Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately.• Lining Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12.• Stopper Materials: Must be installed using suitable panel pins, these are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door lining range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Internal Door Lining Sets - 22mm Thick

Solid Oak Internal Door Lining Sets - 22mm Thick Solid Oak 22mm Door Lining Sets are manufactured from the finest quality American Oak and is part of our door lining collection. Specification • Door Lining Thickness: 22mm • Width Options: 69mm - 95mm - 106mm - 119mm - 131mm - 138mm - 145mm - 169mm - 195mm - 219mm - 245mm• Door Size: The lining head is 1000mm on a Single Door opening and 2100mm on a Double Door opening. The head is untrenched and can be trenched to suit your door size by a professional fitter.   • Single Door Set: 2 x 2100mm & 1 x 1000mm pieces in each set also includes loose door stops   • Double Door Set: 3 x 2100mm pieces in each set also includes loose door stops   • Loose door stops included: Depth Options 69mm = 25mm x 12mm one side pencil round, 95mm to 245mm = 44mm x 12mm one side pencil round.   • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Lining Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately.• Lining Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12.• Stopper Materials: Must be installed using suitable panel pins, these are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door lining range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Internal Door Lining Sets - 25mm Thick

Solid Oak Internal Door Lining Sets - 25mm Thick Solid Oak 25mm Door Lining Sets are manufactured from the finest quality American Oak and is part of our door lining collection. Specification • Door Lining Thickness: 25mm • Width Options: 69mm - 95mm - 106mm - 119mm - 131mm - 138mm - 145mm - 169mm - 195mm - 219mm - 245mm• Door Size: The lining head is 1000mm on a Single Door opening and 2100mm on a Double Door opening. The head is untrenched and can be trenched to suit your door size by a professional fitter.   • Single Door Set: 2 x 2100mm & 1 x 1000mm pieces in each set also includes loose door stops   • Double Door Set: 3 x 2100mm pieces in each set also includes loose door stops   • Loose door stops included: Depth Options 69mm = 25mm x 12mm one side pencil round, 95mm to 245mm = 44mm x 12mm one side pencil round.   • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Lining Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately.• Lining Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12.• Stopper Materials: Must be installed using suitable panel pins, these are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door lining range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.