Pine Dowel Rod 12mm Pine Dowel manufactured from the finest quality Pine and is part of our dowel collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Diameter: 12mm • Construction: One piece - may be laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied all round excluding ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full dowel collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Dowel Rod 15mm Pine Dowel manufactured from the finest quality Pine and is part of our dowel collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Diameter: 15mm • Construction: One piece - may be laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied all round excluding ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full dowel collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Dowel Rod 18mm Pine Dowel manufactured from the finest quality Pine and is part of our dowel collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Diameter: 18mm • Construction: One piece - may be laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied all round excluding ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full dowel collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Dowel Rod 21mm Pine Dowel manufactured from the finest quality Pine and is part of our dowel collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Diameter: 21mm • Construction: One piece - may be laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied all round excluding ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full dowel collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Dowel Rod 25mm Pine Dowel manufactured from the finest quality Pine and is part of our dowel collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Diameter: 25mm • Construction: One piece - may be laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied all round excluding ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full dowel collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Dowel Rod 6mm Pine Dowel manufactured from the finest quality Pine and is part of our dowel collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Diameter: 6mm • Construction: One piece - may be laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied all round excluding ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full dowel collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Dowel Rod 9mm Pine Dowel manufactured from the finest quality Pine and is part of our dowel collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Diameter: 9mm • Construction: One piece - may be laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied all round excluding ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full dowel collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Moulding M16 - 32mm x 21mm
Pine Moulding M16 - 32mm x 21mm Pine Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 21mm • Width: 32mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Moulding M17 - 34mm x 12mm
Pine Moulding M17 - 34mm x 12mm Pine Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 12mm • Width: 34mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front face • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Panel Moulding M12 - 15mm x 8mm
Pine Panel Moulding M12 - 15mm x 8mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 8mm • Width: 15mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Panel Moulding M13 - 21mm x 8mm
Pine Panel Moulding M13 - 21mm x 8mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 8mm • Width: 21mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Panel Moulding M18 - 29mm x 15mm
Pine Panel Moulding M18 - 29mm x 15mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 15mm • Width: 29mm • Construction: Laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Panel Moulding M19 - 21mm x 9mm
Pine Panel Moulding M19 - 21mm x 9mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 21mm • Width: 9mm • Construction: Laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Panel Moulding M20 - 34mm x 12mm
Pine Panel Moulding M20 - 34mm x 12mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 34mm • Width: 12mm • Construction: Laminated Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Panel Moulding M8 - 21mm x 9mm
Pine Panel Moulding M8 - 21mm x 9mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 9mm • Width: 21mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Panel Moulding M9 - 34mm x 12mm
Pine Panel Moulding M9 - 34mm x 12mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 12mm • Width: 34mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 100mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 100mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 105mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 105mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 110mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 110mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 115mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 115mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 120mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 120mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 125mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 125mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 130mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 130mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 135mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 135mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 140mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 140mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 145mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 145mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 150mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 150mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 155mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 155mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 160mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 160mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 165mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 165mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 170mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 170mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 175mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 175mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 180mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 180mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 185mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 185mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 190mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 190mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 195mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 195mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 200mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 200mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 205mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 205mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 210mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 210mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 215mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 215mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 220mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 220mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 30mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 30mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 35mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 35mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 40mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 40mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 45mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 45mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 50mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 50mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 55mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 55mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 60mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 60mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 65mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 65mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 69mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 69mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 75mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 75mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 80mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 80mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 85mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 85mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 90mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 90mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PAR Timber 95mm Wide Pine PAR Timber manufactured from Pine. Specification • Length Options: 1000mm - 2000mm - 3000mm - 3500mm - Supplied as one full solid timber length • Thickness: 20mm • Width: 95mm • Construction: One solid piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. Top face, left and right side • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets - 3.5m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine PSE Stripwood 34mm x 9mm Pine PSE Stripwood manufactured from the finest quality Pine and is part of our PSE collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 9mm • Width: 34mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Quadrant Beading 12mm x 12mm
Pine Quadrant Beading 12mm x 12mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 12mm • Profile Depth: 12mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Quadrant Beading 15mm x 15mm
Pine Quadrant Beading 15mm x 15mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 15mm • Profile Depth: 15mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Quadrant Beading 18mm x 18mm
Pine Quadrant Beading 18mm x 18mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 18mm • Profile Depth: 18mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Quadrant Beading 21mm x 21mm
Pine Quadrant Beading 21mm x 21mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 21mm • Profile Depth: 21mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Quadrant Beading 6mm x 6mm
Pine Quadrant Beading 6mm x 6mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 6mm • Profile Depth: 6mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Quadrant Beading 9mm x 9mm
Pine Quadrant Beading 9mm x 9mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 9mm • Profile Depth: 9mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Pine Quadrant Beading 12mm x 12mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 12mm • Profile Depth: 12mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Ready to apply a protective finish • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and adhesive Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 12mm x 9mm
Pine Rectangle Beading 12mm x 9mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 9mm • Width: 12mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 15mm x 12mm
Pine Rectangle Beading 15mm x 12mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 12mm • Width: 15mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 15mm x 9mm
Pine Rectangle Beading 15mm x 9mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 12mm • Width: 9mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 18mm x 12mm
Pine Rectangle Beading 18mm x 12mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 12mm • Width: 18mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 18mm x 15mm
Pine Rectangle Beading 18mm x 15mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 15mm • Width: 18mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 18mm x 9mm
Pine Rectangle Beading 18mm x 9mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 9mm • Width: 18mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 21mm x 12mm
Pine Rectangle Beading 21mm x 12mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 12mm • Width: 21mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 21mm x 15mm
Pine Rectangle Beading 21mm x 15mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 15mm • Width: 21mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Rectangle Beading 21mm x 9mm
Pine Rectangle Beading 21mm x 9mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 9mm • Width: 21mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 3 sides. One large side and two small sides • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Beading 12mm x 12mm
Pine Scotia Beading 12mm x 12mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 12mm • Profile Depth: 12mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Beading 15mm x 15mm
Pine Scotia Beading 15mm x 15mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 15mm • Profile Depth: 15mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Beading 18mm x 18mm
Pine Scotia Beading 18mm x 18mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 18mm • Profile Depth: 18mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Beading 21mm x 21mm
Pine Scotia Beading 21mm x 21mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 21mm • Profile Depth: 21mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Beading 30mm x 30mm
Pine Scotia Beading 30mm x 30mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 30mm • Profile Depth: 30mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Scotia Beading 9mm x 9mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 9mm • Profile Depth: 9mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to the front curvature • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Beading 12mm x 12mm
Pine Square Beading 12mm x 12mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 12mm • Profile Depth: 12mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Beading 15mm x 15mm
Pine Square Beading 15mm x 15mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 15mm • Profile Depth: 15mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Beading 18mm x 18mm
Pine Square Beading 18mm x 18mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 18mm • Profile Depth: 18mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Beading 21mm x 21mm
Pine Square Beading 21mm x 21mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 21mm • Profile Depth: 21mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Beading 9mm x 9mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Profile Height: 9mm • Profile Depth: 9mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Square Corner Angle Moulding 32mm x 32mm
Pine Square Corner Angle Moulding 32mm x 32mm Pine Square Corner Angle Moulding is manufactured from the finest quality Pine and is part of our cushion moulding collection. Specification • External Size: 32mm x 32mm* • Length Options: 1000mm - 2400mm - Supplied as one full timber length • Thickness: 4mm • Construction: Pine laminated *For information on the internal size dimensions please refer to our technical image Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 external sides • Out of Sight: The internal 2 sides of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine - with knots • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full cushion moulding range collection: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.