Pine Bromley Skirting 3.5 metre
Pine Bromley Skirting 3.5 Metre Pine Bromley Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Single Edge Skirting 3.5 metre
Pine Bullnose Single Edge Skirting 3.5 Metre Pine Bullnose Single Edge Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Bullnose Skirting 3.5 metre
Pine Bullnose Skirting 3.5 Metre Pine Bullnose Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Cambridge Skirting 3.5 metre
Pine Cambridge Skirting 3.5 Metre Pine Cambridge Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Cromwell Skirting 3.5 metre
Pine Cromwell Skirting 3.5 Metre Pine Cromwell Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Henley Skirting 3.5 metre
Pine Henley Skirting 3.5 Metre Pine Henley Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Pine Heritage Skirting 3.5 metre
Pine Heritage Skirting 3.5 Metre Pine Heritage Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Hove Skirting 3.5 Metre Pine Hove Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Knightsbridge Skirting 3.5 metre
Pine Knightsbridge Skirting 3.5 Metre Pine Knightsbridge Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Lambs Tongue Skirting 3.6 metre Length
Pine Lambs Tongue Skirting 3.6 Metre Pine Lambs Tongue Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3600mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Long Chamfer Skirting 3.5 metre
Pine Long Chamfer Skirting 3.5 Metre Pine Long Chamfer Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Ogee Skirting 3.5 Metre Pine Ogee Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Orchard Skirting 3.5 metre
Pine Orchard Skirting 3.5 Metre Pine Orchard Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Ovolo Skirting 3.5 Metre Pine Ovolo Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Regent Skirting 3.5 metre
Pine Regent Skirting 3.5 Metre Pine Regent Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Torus Skirting 3.5 Metre Pine Torus Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Tudor Skirting 3.5 Metre Pine Tudor Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Tulip Skirting 3.5 Metre Pine Tulip Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Warwick Skirting 3.5 metre
Pine Warwick Skirting 3.5 Metre Pine Warwick Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Winchester Skirting 3.5 metre
Pine Winchester Skirting 3.5 Metre Pine Winchester Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Pine Windsor Skirting 3.5 metre
Pine Windsor Skirting 3.5 Metre Pine Windsor Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3500mm - Supplied as one full timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination Finish Options • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bromley Skirting 3 metre
Solid Ash Bromley Skirting 3 Metre Solid Ash Bromley Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Bullnose Skirting 3 metre
Solid Ash Bullnose Skirting 3 Metre Solid Ash Bullnose Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Cambridge Skirting 3 metre
Solid Ash Cambridge Skirting 3 Metre Solid Ash Cambridge Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Cromwell Skirting 3 metre
Solid Ash Cromwell Skirting 3 Metre Solid Ash Cromwell Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Henley Skirting 3 metre
Solid Ash Henley Skirting 3 Metre Solid Ash Henley Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Heritage Skirting 3 metre
Solid Ash Heritage Skirting 3 Metre Solid Ash Heritage Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Hove Skirting 3 metre
Solid Ash Hove Skirting 3 Metre Solid Ash Hove Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Knightsbridge Skirting 3 metre
Solid Ash Knightsbridge Skirting 3 Metre Solid Ash Knightsbridge Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Lambs Tongue Skirting 3 metre
Solid Ash Lambs Tongue Skirting 3 Metre Solid Ash Lambs Tongue Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Long Chamfer Skirting 3 metre
Solid Ash Long Chamfer Skirting 3 Metre Solid Ash Long Chamfer Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Ogee Skirting 3 metre
Solid Ash Ogee Skirting 3 Metre Solid Ash Ogee Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Orchard Skirting 3 metre
Solid Ash Orchard Skirting 3 Metre Solid Ash Orchard Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Ovolo Skirting 3 metre
Solid Ash Ovolo Skirting 3 Metre Solid Ash Ovolo Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Regent Skirting 3 metre
Solid Ash Regent Skirting 3 Metre Solid Ash Regent Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Torus Skirting 3 metre
Solid Ash Torus Skirting 3 Metre Solid Ash Torus Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Tudor Skirting 3 metre
Solid Ash Tudor Skirting 3 Metre Solid Ash Tudor Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Tulip Skirting 3 metre
Solid Ash Tulip Skirting 3 Metre Solid Ash Tulip Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Warwick Skirting 3 metre
Solid Ash Warwick Skirting 3 Metre Solid Ash Warwick Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Winchester Skirting 3 metre
Solid Ash Winchester Skirting 3 Metre Solid Ash Winchester Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Windsor Skirting 3 metre
Solid Ash Windsor Skirting 3 Metre Solid Ash Windsor Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bromley Skirting 3 metre
Solid Beech Bromley Skirting 3 Metre Solid Beech Bromley Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Bullnose Skirting 3 metre
Solid Beech Bullnose Skirting 3 Metre Solid Beech Bullnose Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Cambridge Skirting 3 metre
Solid Beech Cambridge Skirting 3 Metre Solid Beech Cambridge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Cromwell Skirting 3 metre
Solid Beech Cromwell Skirting 3 Metre Solid Beech Cromwell Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Henley Skirting 3 metre
Solid Beech Henley Skirting 3 Metre Solid Beech Henley Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Heritage Skirting 3 metre
Solid Beech Heritage Skirting 3 Metre Solid Beech Heritage Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Hove Skirting 3 metre
Solid Beech Hove Skirting 3 Metre Solid Beech Hove Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.
Solid Beech Knightsbridge Skirting 3 metre
Solid Beech Knightsbridge Skirting 3 Metre Solid Beech Knightsbridge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Lambs Tongue Skirting 3 metre
Solid Beech Lambs Tongue Skirting 3 Metre Solid Beech Lambs Tongue Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Long Chamfer Skirting 3 metre
Solid Beech Long Chamfer Skirting 3 Metre Solid Beech Long Chamfer Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Ogee Skirting 3 metre
Solid Beech Ogee Skirting 3 Metre Solid Beech Ogee Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Orchard Skirting 3 metre
Solid Beech Orchard Skirting 3 Metre Solid Beech Orchard Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Ovolo Skirting 3 metre
Solid Beech Ovolo Skirting 3 Metre Solid Beech Ovolo Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Regent Skirting 3 metre
Solid Beech Regent Skirting 3 Metre Solid Beech Regent Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Torus Skirting 3 metre
Solid Beech Torus Skirting 3 Metre Solid Beech Torus Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Tudor Skirting 3 metre
Solid Beech Tudor Skirting 3 Metre Solid Beech Tudor Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Tulip Skirting 3 metre
Solid Beech Tulip Skirting 3 Metre Solid Beech Tulip Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Warwick Skirting 3 metre
Solid Beech Warwick Skirting 3 Metre Solid Beech Warwick Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Winchester Skirting 3 metre
Solid Beech Winchester Skirting 3 Metre Solid Beech Winchester Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Windsor Skirting 3 metre
Solid Beech Windsor Skirting 3 Metre Solid Beech Windsor Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Bullnose Skirting 2.7 metre
Solid Cherry Bullnose Skirting 2.7 Metre Solid Cherry Bullnose Skirting is manufactured from the finest quality North American Cherry and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Long Chamfer Skirting 2.7 metre
Solid Cherry Long Chamfer Skirting 2.7 Metre Solid Cherry Long Chamfer Skirting is manufactured from the finest quality North American Cherry and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Bromley Skirting 3 metre
Solid Maple Bromley Skirting 3 Metre Solid Maple Bromley Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Bullnose Skirting 2.7 metre
Solid Maple Bullnose Skirting 2.7 Metre Solid Maple Bullnose Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 2700mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Cambridge Skirting 3 metre
Solid Maple Cambridge Skirting 3 Metre Solid Maple Cambridge Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Cromwell Skirting 3 metre
Solid Maple Cromwell Skirting 3 Metre Solid Maple Cromwell Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Henley Skirting 3 metre
Solid Maple Henley Skirting 3 Metre Solid Maple Henley Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Heritage Skirting 3 metre
Solid Maple Heritage Skirting 3 Metre Solid Maple Heritage Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Hove Skirting 3 metre
Solid Maple Hove Skirting 3 Metre Solid Maple Hove Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Knightsbridge Skirting 3 metre
Solid Maple Knightsbridge Skirting 3 Metre Solid Maple Knightsbridge Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Lambs Tongue Skirting 3 metre
Solid Maple Lambs Tongue Skirting 3 Metre Solid Maple Lambs Tongue Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Long Chamfer Skirting 3 metre
Solid Maple Long Chamfer Skirting 3 Metre Solid Maple Long Chamfer Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Ogee Skirting 3 metre
Solid Maple Ogee Skirting 3 Metre Solid Maple Ogee Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Orchard Skirting 3 metre
Solid Maple Orchard Skirting 3 Metre Solid Maple Orchard Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Ovolo Skirting 3 metre
Solid Maple Ovolo Skirting 3 Metre Solid Maple Ovolo Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Regent Skirting 3 metre
Solid Maple Regent Skirting 3 Metre Solid Maple Regent Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Torus Skirting 3 metre
Solid Maple Torus Skirting 3 Metre Solid Maple Torus Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Tudor Skirting 3 metre
Solid Maple Tudor Skirting 3 Metre Solid Maple Tudor Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Tulip Skirting 3 metre
Solid Maple Tulip Skirting 3 Metre Solid Maple Tulip Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Warwick Skirting 3 metre
Solid Maple Warwick Skirting 3 Metre Solid Maple Warwick Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Winchester Skirting 3 metre
Solid Maple Winchester Skirting 3 Metre Solid Maple Winchester Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Windsor Skirting 3 metre
Solid Maple Windsor Skirting 3 Metre Solid Maple Windsor Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bromley Skirting Board 3 metre
Solid Oak Bromley Skirting Board 3 Metre Solid Oak Bromley Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Bullnose Skirting Board 3 metre
Solid Oak Bullnose Skirting Board 3 Metre Solid Oak Bullnose Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness Options: 15mm - 18mm - 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Cambridge Skirting Board 3 metre
Solid Oak Cambridge Skirting Board 3 Metre Solid Oak Cambridge Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Cromwell Skirting Board 3 metre
Solid Oak Cromwell Skirting Board 3 Metre Solid Oak Cromwell Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Henley Skirting Board 3 metre
Solid Oak Henley Skirting Board 3 Metre Solid Oak Henley Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Heritage Skirting Board 3 metre
Solid Oak Heritage Skirting Board 3 Metre Solid Oak Heritage Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Hove Skirting Board 3 metre
Solid Oak Hove Skirting Board 3 Metre Solid Oak Hove Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Knightsbridge Skirting Board 3 metre
Solid Oak Knightsbridge Skirting Board 3 Metre Solid Oak Knightsbridge Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Lambs Tongue Skirting Board 3 metre
Solid Oak Lambs Tongue Skirting Board 3 Metre Solid Oak Lambs Tongue Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Long Chamfer Skirting Board 3 metre
Solid Oak Long Chamfer Skirting Board 3 Metre Solid Oak Long Chamfer Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Ogee Skirting Board 3 metre
Solid Oak Ogee Skirting Board 3 Metre Solid Oak Ogee Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Orchard Skirting Board 3 metre
Solid Oak Orchard Skirting Board 3 Metre Solid Oak Orchard Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Ovolo Skirting Board 3 metre
Solid Oak Ovolo Skirting Board 3 Metre Solid Oak Ovolo Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Regent Skirting Board 3 metre
Solid Oak Regent Skirting Board 3 Metre Solid Oak Regent Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Torus Skirting Board 3 metre
Solid Oak Torus Skirting Board 3 Metre Solid Oak Torus Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Tudor Skirting Board 3 metre
Solid Oak Tudor Skirting Board 3 Metre Solid Oak Tudor Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Tulip Skirting Board 3 metre
Solid Oak Tulip Skirting Board 3 Metre Solid Oak Tulip Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Warwick Skirting Board 3 metre
Solid Oak Warwick Skirting Board 3 Metre Solid Oak Warwick Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Winchester Skirting Board 3 metre
Solid Oak Winchester Skirting Board 3 Metre Solid Oak Winchester Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Windsor Skirting Board 3 metre
Solid Oak Windsor Skirting Board 3 Metre Solid Oak Windsor Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Bullnose Skirting 3 metre
Solid Sapele Bullnose Skirting 3 Metre Solid Sapele Bullnose Skirting is manufactured from the finest quality Solid African Sapele and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Sapele Long Chamfer Skirting 3 metre
Solid Sapele Long Chamfer Skirting 3 Metre Solid Sapele Long Chamfer Skirting is manufactured from the finest quality Solid African Sapele and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Sapele Oiled: Matt Finish - one coat of light golden oil* • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid African Sapele • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Bromley Skirting 3 metre
Solid Walnut Bromley Skirting 3 Metre Solid Walnut Bromley Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Bullnose Skirting 3 metre
Solid Walnut Bullnose Skirting 3 Metre Solid Walnut Bullnose Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Cambridge Skirting 3 metre
Solid Walnut Cambridge Skirting 3 Metre Solid Walnut Cambridge Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Cromwell Skirting 3 metre
Solid Walnut Cromwell Skirting 3 Metre Solid Walnut Cromwell Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Henley Skirting 3 metre
Solid Walnut Henley Skirting 3 Metre Solid Walnut Henley Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Heritage Skirting 3 metre
Solid Walnut Heritage Skirting 3 Metre Solid Walnut Heritage Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Hove Skirting 3 metre
Solid Walnut Hove Skirting 3 Metre Solid Walnut Hove Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Knightsbridge Skirting 3 metre
Solid Walnut Knightsbridge Skirting 3 Metre Solid Walnut Knightsbridge Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Lambs Tongue Skirting 3 metre
Solid Walnut Lambs Tongue Skirting 3 Metre Solid Walnut Lambs Tongue Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Long Chamfer Skirting 3 metre
Solid Walnut Long Chamfer Skirting 3 Metre Solid Walnut Long Chamfer Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Ogee Skirting 3 metre
Solid Walnut Ogee Skirting 3 Metre Solid Walnut Ogee Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Orchard Skirting 3 metre
Solid Walnut Orchard Skirting 3 Metre Solid Walnut Orchard Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Ovolo Skirting 3 metre
Solid Walnut Ovolo Skirting 3 Metre Solid Walnut Ovolo Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Regent Skirting 3 metre
Solid Walnut Regent Skirting 3 Metre Solid Walnut Regent Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Torus Skirting 3 metre
Solid Walnut Torus Skirting 3 Metre Solid Walnut Torus Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Tudor Skirting 3 metre
Solid Walnut Tudor Skirting 3 Metre Solid Walnut Tudor Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Tulip Skirting 3 metre
Solid Walnut Tulip Skirting 3 Metre Solid Walnut Tulip Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Warwick Skirting 3 metre
Solid Walnut Warwick Skirting 3 Metre Solid Walnut Warwick Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Winchester Skirting 3 metre
Solid Walnut Winchester Skirting 3 Metre Solid Walnut Winchester Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Windsor Skirting 3 metre
Solid Walnut Windsor Skirting 3 Metre Solid Walnut Windsor Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm • Length: 3000mm - Supplied as one full solid timber length • Thickness: 20mm • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax* • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax* • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied* • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.