Solid Ash Wood to Carpet Threshold 0.9 Metre
Solid Ash Wood to Carpet Threshold 0.9 Metre Solid Ash Wood to Carpet Threshold manufactured from the finest quality Solid North American Ash and is part of our wood to carpet threshold collection. Specification • Length: 900mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash Waxed: Soft Sheen Finish - Medium-brown wax* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Ash Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 0.9m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Wood to Carpet Threshold 1.0 Metre
Solid Ash Wood to Carpet Threshold 1.0 Metre Solid Ash Wood to Carpet Threshold manufactured from the finest quality Solid North American Ash and is part of our wood to carpet threshold collection. Specification • Length: 1000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash Waxed: Soft Sheen Finish - Medium-brown wax* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Ash Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Wood to Carpet Threshold 1.6 Metre
Solid Ash Wood to Carpet Threshold 1.6 Metre Solid Ash Wood to Carpet Threshold manufactured from the finest quality Solid North American Ash and is part of our wood to carpet threshold collection. Specification • Length: 1600mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash Waxed: Soft Sheen Finish - Medium-brown wax* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Ash Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.6m = 3-4 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Wood to Carpet Threshold 2.4 Metre
Solid Ash Wood to Carpet Threshold 2.4 Metre Solid Ash Wood to Carpet Threshold manufactured from the finest quality Solid North American Ash and is part of our wood to carpet threshold collection. Specification • Length: 2400mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash Waxed: Soft Sheen Finish - Medium-brown wax* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Ash Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 2.4m = 4-5 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Ash Wood to Carpet Threshold 3.0 Metre
Solid Ash Wood to Carpet Threshold 3.0 Metre Solid Ash Wood to Carpet Threshold manufactured from the finest quality Solid North American Ash and is part of our wood to carpet threshold collection. Specification • Length: 3000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash Waxed: Soft Sheen Finish - Medium-brown wax* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Ash Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 3.0m = 5-6 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Wood to Carpet Threshold 0.9 Metre
Solid Beech Wood to Carpet Threshold 0.9 Metre Solid Beech Wood to Carpet Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our wood to carpet threshold collection. Specification • Length: 900mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 0.9m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Wood to Carpet Threshold 1.0 Metre
Solid Beech Wood to Carpet Threshold 1.0 Metre Solid Beech Wood to Carpet Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our wood to carpet threshold collection. Specification • Length: 1000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Wood to Carpet Threshold 1.6 Metre
Solid Beech Wood to Carpet Threshold 1.6 Metre Solid Beech Wood to Carpet Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our wood to carpet threshold collection. Specification • Length: 1600mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.6m = 3-4 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Wood to Carpet Threshold 2.4 Metre
Solid Beech Wood to Carpet Threshold 2.4 Metre Solid Beech Wood to Carpet Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our wood to carpet threshold collection. Specification • Length: 2400mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 2.4m = 4-5 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Beech Wood to Carpet Threshold 3.0 Metre
Solid Beech Wood to Carpet Threshold 3.0 Metre Solid Beech Wood to Carpet Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our wood to carpet threshold collection. Specification • Length: 3000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Beech Lacquered: Gloss Finish - Two coats of clear lacquer* • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 3.0m = 5-6 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Wood to Carpet Threshold 1.0 Metre
Solid Cherry Wood to Carpet Threshold 0.9 Metre Solid Cherry Wood to Carpet Threshold manufactured from the finest quality North American Cherry and is part of our wood to carpet threshold collection. Specification • Length: 900mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Cherry Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Cherry Product in Oiled Finish Timber Specie Information • Specie: North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Wood to Carpet Threshold 1.6 Metre
Solid Cherry Wood to Carpet Threshold 1.6 Metre Solid Cherry Wood to Carpet Threshold manufactured from the finest quality North American Cherry and is part of our wood to carpet threshold collection. Specification • Length: 1600mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Cherry Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Cherry Product in Oiled Finish Timber Specie Information • Specie: North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.6m = 3-4 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Wood to Carpet Threshold 2.4 Metre
Solid Cherry Wood to Carpet Threshold 2.4 Metre Solid Cherry Wood to Carpet Threshold manufactured from the finest quality North American Cherry and is part of our wood to carpet threshold collection. Specification • Length: 2400mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Cherry Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Cherry Product in Oiled Finish Timber Specie Information • Specie: North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 2.4m = 4-5 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Cherry Wood to Carpet Threshold 3.0 Metre
Solid Cherry Wood to Carpet Threshold 3.0 Metre Solid Cherry Wood to Carpet Threshold manufactured from the finest quality North American Cherry and is part of our wood to carpet threshold collection. Specification • Length: 3000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Cherry Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Cherry Lacquered: Satin finish - One coat of clear lacquer and medium brown wax* • Cherry Oiled: Matt Finish - one coat of light golden oil* • Cherry Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Cherry Product in Oiled Finish Timber Specie Information • Specie: North American Cherry • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 3.0m = 5-6 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Wood to Carpet Threshold 1.0 Metre
Solid Maple Wood to Carpet Threshold 1.0 Metre Solid Maple Wood to Carpet Threshold manufactured from the finest quality North American Maple and is part of our wood to carpet threshold collection. Specification • Length: 1000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Wood to Carpet Threshold 1.6 Metre
Solid Maple Wood to Carpet Threshold 1.6 Metre Solid Maple Wood to Carpet Threshold manufactured from the finest quality North American Maple and is part of our wood to carpet threshold collection. Specification • Length: 1600mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.6m = 3-4 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Wood to Carpet Threshold 2.4 Metre
Solid Maple Wood to Carpet Threshold 2.4 Metre Solid Maple Wood to Carpet Threshold manufactured from the finest quality North American Maple and is part of our wood to carpet threshold collection. Specification • Length: 2400mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 2.4m = 4-5 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Maple Wood to Carpet Threshold 3.0 Metre
Solid Maple Wood to Carpet Threshold 3.0 Metre Solid Maple Wood to Carpet Threshold manufactured from the finest quality North American Maple and is part of our wood to carpet threshold collection. Specification • Length: 3000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Maple Lacquered: Gloss Finish - Two coats of clear lacquer* • Maple Oiled: Matt Finish - one coat of light golden oil* • Maple Waxed: Soft Sheen Finish - Medium-brown wax* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Maple Product in Oiled Finish Timber Specie Information • Specie: North American Maple • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 3.0m = 5-6 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak White Primed Wood to Carpet Threshold 0.9 Metre
Solid Oak White Primed Wood to Carpet Threshold 0.9 Metre Solid Oak White Primed Wood to Carpet Threshold manufactured from the finest quality American Oak and is part of our wood to carpet threshold collection. Specification • Length: 900mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 0.9m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Wood to Carpet Threshold 0.9 Metre
Solid Oak Wood to Carpet Threshold 0.9 Metre Solid Oak Wood to Carpet Threshold manufactured from the finest quality American Oak and is part of our wood to carpet threshold collection. Specification • Length: 900mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak Waxed: Soft Sheen Finish - Medium-brown wax* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 0.9m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Wood to Carpet Threshold 1.0 Metre
Solid Oak Wood to Carpet Threshold 1.0 Metre Solid Oak Wood to Carpet Threshold manufactured from the finest quality American Oak and is part of our wood to carpet threshold collection. Specification • Length: 1000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak Waxed: Soft Sheen Finish - Medium-brown wax* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Wood to Carpet Threshold 1.6 Metre
Solid Oak Wood to Carpet Threshold 1.6 Metre Solid Oak Wood to Carpet Threshold manufactured from the finest quality American Oak and is part of our wood to carpet threshold collection. Specification • Length: 1600mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak Waxed: Soft Sheen Finish - Medium-brown wax* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.6m = 3-4 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Wood to Carpet Threshold 2.4 Metre
Solid Oak Wood to Carpet Threshold 2.4 Metre Solid Oak Wood to Carpet Threshold manufactured from the finest quality American Oak and is part of our wood to carpet threshold collection. Specification • Length: 2400mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak Waxed: Soft Sheen Finish - Medium-brown wax* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 2.4m = 4-5 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Oak Wood to Carpet Threshold 3.0 Metre
Solid Oak Wood to Carpet Threshold 3.0 Metre Solid Oak Wood to Carpet Threshold manufactured from the finest quality American Oak and is part of our wood to carpet threshold collection. Specification • Length: 3000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax* • Oak Oiled: Matt finish - One coat of light golden oil* • Oak Waxed: Soft Sheen Finish - Medium-brown wax* • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 3.0m = 5-6 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Wood to Carpet Threshold 0.9 Metre
Solid Walnut Wood to Carpet Threshold 0.9 Metre Solid Walnut Wood to Carpet Threshold manufactured from the finest quality American Black Walnut and is part of our wood to carpet threshold collection. Specification • Length: 900mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax* • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish* • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish* • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 0.9m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Wood to Carpet Threshold 1.0 Metre
Solid Walnut Wood to Carpet Threshold 1.0 Metre Solid Walnut Wood to Carpet Threshold manufactured from the finest quality American Black Walnut and is part of our wood to carpet threshold collection. Specification • Length: 1000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax* • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish* • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish* • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Wood to Carpet Threshold 1.6 Metre
Solid Walnut Wood to Carpet Threshold 1.6 Metre Solid Walnut Wood to Carpet Threshold manufactured from the finest quality American Black Walnut and is part of our wood to carpet threshold collection. Specification • Length: 1600mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax* • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish* • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish* • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 1.6m = 3-4 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. v
Solid Walnut Wood to Carpet Threshold 2.4 Metre
Solid Walnut Wood to Carpet Threshold 2.4 Metre Solid Walnut Wood to Carpet Threshold manufactured from the finest quality American Black Walnut and is part of our wood to carpet threshold collection. Specification • Length: 2400mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax* • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish* • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish* • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 2.4m = 4-5 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.
Solid Walnut Wood to Carpet Threshold 3.0 Metre
Solid Walnut Wood to Carpet Threshold 3.0 Metre Solid Walnut Wood to Carpet Threshold manufactured from the finest quality American Black Walnut and is part of our wood to carpet threshold collection. Specification • Length: 3000mm - Supplied as one full solid timber length • Profile Width: 40mm wide for 18mm & 20mm rebate option – 45mm wide for 15mm rebate option • Rebate Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination Finish Options • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax* • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish* • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish* • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish* • Selected Finish Option: Applied to the top face. • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options * These finishes are for internal use only and are not recommended to be used in water exposed areas. Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads • Screw and Pellet Recommendation Per Length: 3.0m = 5-6 screws/pellets Samples, Matching Products & Further Information • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full wood to carpet threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.