Solid Oak Pencil Round Handrail Wall Plate 3 Metre

  Solid Oak Pencil Round Handrail Wall Plate is manufactured from the finest quality American Oak and is part of our Wall plate collection. Specification • Height Options: 69mm - 80mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 3m = 5-6 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Handrail Wall Plate Collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Mini Chamfered Handrail Wall Plate 3 Metre

  Solid Oak Mini Chamfered Handrail Wall Plate is manufactured from the finest quality American Oak and is part of our Wall plate collection. Specification • Height Options: 69mm - 80mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 3m = 5-6 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Handrail Wall Plate Collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Handrail Wall Plate 3 Metre

  Solid Oak Square Edge Handrail Wall Plate is manufactured from the finest quality American Oak and is part of our Wall plate collection. Specification • Height Options: 69mm - 80mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 3m = 5-6 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Handrail Wall Plate Collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Chamfered Handrail Wall Plate 3 Metre

  Solid Oak Chamfered Handrail Wall Plate is manufactured from the finest quality American Oak and is part of our Wall plate collection. Specification • Height Options: 69mm - 80mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 3m = 5-6 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Handrail Wall Plate Collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Handrail Wall Plate 3 Metre

  Solid Oak Bullnose Handrail Wall Plate is manufactured from the finest quality American Oak and is part of our Wall plate collection. Specification • Height Options: 69mm - 80mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak     • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 3m = 5-6 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Handrail Wall Plate Collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 160mm Wide

  Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 160mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 144mm Wide

  Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 130mm Wide

  Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 120mm Wide

  Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 110mm Wide

  Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 110mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 95mm Wide

  Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 69mm Wide

  Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 69mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 160mm Wide

  Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 160mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 144mm Wide

  Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 130mm Wide

  Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 120mm Wide

  Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 110mm Wide

  Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 110mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 95mm Wide

  Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 69mm Wide

  Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 69mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Pig's Ear Handrail 4.2 Metre Clearance

  Solid Oak White Primed Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 4200mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Round Mopstick Handrail 1.0 Metre Clearance

  Solid Oak White Primed Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 1000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 2 brackets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Round Mopstick Handrail 2.1 Metre Clearance

  Solid Oak White Primed Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 2100mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 3 brackets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Round Mopstick Handrail 3.0 Metre Clearance

  Solid Oak White Primed Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 3000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 4-5 brackets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Round Mopstick Handrail 3.6 Metre Clearance

  Solid Oak White Primed Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 3600mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 4-5 brackets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Round Mopstick Handrail 4.2 Metre Clearance

  Solid Oak White Primed Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 4200mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 5-6 brackets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Pig's Ear Handrail 2.1 Metre Clearance

  Solid Oak White Primed Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 2100mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 3-4 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Pig's Ear Handrail 3.0 Metre Clearance

  Solid Oak White Primed Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 3000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Pig's Ear Handrail 3.6 Metre Clearance

  Solid Oak White Primed Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 3600mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed Pig's Ear Handrail 1.0 Metre Clearance

  Solid Oak White Primed Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 1000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 2-3 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Stair Tread 1 Metre

  Solid Oak Bullnose Stair Tread manufactured from the finest quality American Oak and is part of our stair treads collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Thickness Options: 20mm - 22mm - 25mm   • Depth Options: 145mm - 169mm - 195mm - 219mm - 245mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1m = 4 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full stair tread collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Round Mopstick Handrail 3.0 Metre

  Solid Oak Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 3000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 4-5 brackets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Stair Nosing 1.0 Metre

  Solid Oak Stair Nosing is manufactured from the finest quality American Oak and is part of our stair nosing collection. Specification • External Size Options: 25mm x 25mm - 30mm x 30mm - 35mm x 35mm - 40mm x 40mm - 45mm x 45mm*   • Length: 1000mm - Supplied as one full solid timber length   • Thickness: 7mm • Construction: One solid piece - no lamination   *For information on the internal size dimensions please refer to our technical image   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 external sides   • Out of Sight: The internal 2 sides of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full stair nosing range collection: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Stair Tread 1 Metre

  Solid Oak Square Edge Stair Tread manufactured from the finest quality American Oak and is part of our stair treads collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Thickness Options: 20mm - 22mm - 25mm   • Depth Options: 145mm - 169mm - 195mm - 219mm - 245mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1m = 4 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full stair tread collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Pencil Round Stair Tread 1 Metre

  Solid Oak Pencil Round Stair Tread manufactured from the finest quality American Oak and is part of our stair treads collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Thickness Options: 20mm - 22mm - 25mm   • Depth Options: 145mm - 169mm - 195mm - 219mm - 245mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1m = 4 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full stair tread collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Rounded Stair Tread 1 Metre

  Solid Oak Rounded Stair Tread manufactured from the finest quality American Oak and is part of our stair treads collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Thickness Options: 20mm - 22mm - 25mm   • Depth Options: 145mm - 169mm - 195mm - 219mm - 245mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1m = 4 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full stair tread collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Pig's Ear Handrail 4.2 Metre

  Solid Oak Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 4200mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Handrail Spindle Fillet 32MM x 9MM

  Solid Oak Square Handrail Spindle Fillet is manufactured from the finest quality American Oak and is part of our Fillet collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 9mm   • Width: 32mm • Construction: One solid piece - no lamination   Finish Options    • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using panel pins, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Handrail Spindle Fillet 41MM x 9MM

  Solid Oak Square Handrail Spindle Fillet is manufactured from the finest quality American Oak and is part of our Fillet collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 9mm   • Width: 41mm • Construction: One solid piece - no lamination   Finish Options    • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using panel pins, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Stair Nosing 3.0 Metre

  Solid Oak Stair Nosing is manufactured from the finest quality American Oak and is part of our stair nosing collection. Specification • External Size Options: 30mm x 30mm - 35mm x 35mm - 40mm x 40mm - 45mm x 45mm*   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 7mm • Construction: One solid piece - no lamination   *For information on the internal size dimensions please refer to our technical image   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 external sides   • Out of Sight: The internal 2 sides of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full stair nosing range collection: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Stair Nosing 2.4 Metre

  Solid Oak Stair Nosing is manufactured from the finest quality American Oak and is part of our stair nosing collection. Specification • External Size Options: 25mm x 25mm - 30mm x 30mm - 35mm x 35mm - 40mm x 40mm - 45mm x 45mm*   • Length: 2400mm - Supplied as one full solid timber length   • Thickness: 7mm • Construction: One solid piece - no lamination   *For information on the internal size dimensions please refer to our technical image   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 external sides   • Out of Sight: The internal 2 sides of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full stair nosing range collection: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Stair Nosing 0.9 Metre

  Solid Oak Stair Nosing is manufactured from the finest quality American Oak and is part of our stair nosing collection. Specification • External Size Options: 25mm x 25mm - 30mm x 30mm - 35mm x 35mm - 40mm x 40mm - 45mm x 45mm*   • Length: 900mm - Supplied as one full solid timber length   • Thickness: 7mm • Construction: One solid piece - no lamination   *For information on the internal size dimensions please refer to our technical image   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 external sides   • Out of Sight: The internal 2 sides of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full stair nosing range collection: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Round Mopstick Handrail 4.2 Metre

  Solid Oak Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 4200mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 5-6 brackets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Round Mopstick Handrail 3.6 Metre

  Solid Oak Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 3600mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 4-5 brackets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Round Mopstick Handrail 2.1 Metre

  Solid Oak Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 2100mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 3 brackets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Pig's Ear Handrail 3.0 Metre

  Solid Oak Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 3000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Pig's Ear Handrail 3.6 Metre

  Solid Oak Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 3600mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Round Mopstick Handrail 1.0 Metre

  Solid Oak Round Mopstick Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Diameter: 44mm   • Length: 1000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using handrail brackets - 2 brackets are recommended for this length, sold separately.   Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Pig's Ear Handrail 2.1 Metre

  Solid Oak Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 2100mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 3-4 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Pig's Ear Handrail 1.0 Metre

  Solid Oak Pig's Ear Handrail is manufactured from the finest quality American Oak and is part of our handrail collection. Specification • Handrail Depth (when installed): 60mm   • Length: 1000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to all areas, except for the ends and wall attachment side   • Out of Sight: The wall attachment side of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 2-3 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full handrail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.