Solid Ash Hove Architrave Sets

Solid Ash Hove Architrave Sets  Solid Ash Hove Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Bromley Architrave Sets

Solid Ash Bromley Architrave Sets  Solid Ash Bromley Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Orchard Architrave Sets

Solid Ash Orchard Architrave Sets  Solid Ash Orchard Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Ash Henley Architrave Sets

Solid Ash Henley Architrave Sets  Solid Ash Henley Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Cambridge Architrave Sets

Solid Ash Cambridge Architrave Sets  Solid Ash Cambridge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Warwick Architrave Sets

Solid Ash Warwick Architrave Sets  Solid Ash Warwick Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Cromwell Architrave Sets

Solid Ash Cromwell Architrave Sets  Solid Ash Cromwell Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Regent Architrave Sets

Solid Ash Regent Architrave Sets  Solid Ash Regent Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Long Chamfer Architrave Sets

Solid Ash Long Chamfer Architrave Sets  Solid Ash Long Chamfer Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Ash Tudor Architrave Sets

Solid Ash Tudor Architrave Sets  Solid Ash Tudor Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Windsor Architrave Sets

Solid Ash Windsor Architrave Sets  Solid Ash Windsor Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Ogee Architrave Sets

Solid Ash Ogee Architrave Sets  Solid Ash Ogee Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Tulip Architrave Sets

Solid Ash Tulip Architrave Sets  Solid Ash Tulip Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Ovolo Architrave Sets

Solid Ash Ovolo Architrave Sets  Solid Ash Ovolo Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Torus Architrave Sets

Solid Ash Torus Architrave Sets  Solid Ash Torus Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Heritage Architrave Sets

Solid Ash Heritage Architrave Sets  Solid Ash Heritage Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Knightsbridge Architrave Sets

Solid Ash Knightsbridge Architrave Sets  Solid Ash Knightsbridge Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Bullnose Architrave Sets

Solid Ash Bullnose Architrave Sets  Solid Ash Bullnose Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Winchester Architrave Sets

Solid Ash Winchester Architrave Sets  Solid Ash Winchester Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Lambs Tongue Architrave Sets

Solid Ash Lambs Tongue Architrave Sets  Solid Ash Lambs Tongue Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Hove Skirting 3 metre

Solid Ash Hove Skirting 3 Metre Solid Ash Hove Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Orchard Skirting 3 metre

Solid Ash Orchard Skirting 3 Metre Solid Ash Orchard Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Bromley Skirting 3 metre

Solid Ash Bromley Skirting 3 Metre Solid Ash Bromley Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Henley Skirting 3 metre

Solid Ash Henley Skirting 3 Metre Solid Ash Henley Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Cambridge Skirting 3 metre

Solid Ash Cambridge Skirting 3 Metre Solid Ash Cambridge Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Regent Skirting 3 metre

Solid Ash Regent Skirting 3 Metre Solid Ash Regent Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Cromwell Skirting 3 metre

Solid Ash Cromwell Skirting 3 Metre Solid Ash Cromwell Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Warwick Skirting 3 metre

Solid Ash Warwick Skirting 3 Metre Solid Ash Warwick Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Windsor Skirting 3 metre

Solid Ash Windsor Skirting 3 Metre Solid Ash Windsor Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Tudor Skirting 3 metre

Solid Ash Tudor Skirting 3 Metre Solid Ash Tudor Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Long Chamfer Skirting 3 metre

Solid Ash Long Chamfer Skirting 3 Metre Solid Ash Long Chamfer Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Tulip Skirting 3 metre

Solid Ash Tulip Skirting 3 Metre Solid Ash Tulip Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Ovolo Skirting 3 metre

Solid Ash Ovolo Skirting 3 Metre Solid Ash Ovolo Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Ogee Skirting 3 metre

Solid Ash Ogee Skirting 3 Metre Solid Ash Ogee Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Torus Skirting 3 metre

Solid Ash Torus Skirting 3 Metre Solid Ash Torus Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Heritage Skirting 3 metre

Solid Ash Heritage Skirting 3 Metre Solid Ash Heritage Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Knightsbridge Skirting 3 metre

Solid Ash Knightsbridge Skirting 3 Metre Solid Ash Knightsbridge Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Winchester Skirting 3 metre

Solid Ash Winchester Skirting 3 Metre Solid Ash Winchester Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Lambs Tongue Skirting 3 metre

Solid Ash Lambs Tongue Skirting 3 Metre Solid Ash Lambs Tongue Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Bullnose Skirting 3 metre

Solid Ash Bullnose Skirting 3 Metre Solid Ash Bullnose Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.