Solid Sapele Square Edge Door Threshold 220mm Wide

Solid Sapele Square Edge Door Threshold 220mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 220mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 210mm Wide

Solid Sapele Square Edge Door Threshold 210mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 210mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 200mm Wide

Solid Sapele Square Edge Door Threshold 200mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 200mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 190mm Wide

Solid Sapele Square Edge Door Threshold 190mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 190mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 180mm Wide

Solid Sapele Square Edge Door Threshold 180mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 180mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 170mm Wide

Solid Sapele Square Edge Door Threshold 170mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 170mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 160mm Wide

Solid Sapele Square Edge Door Threshold 160mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 160mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 220mm Wide

Solid Sapele Flat Edge Door Threshold 220mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 220mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 210mm Wide

Solid Sapele Flat Edge Door Threshold 210mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 210mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 200mm Wide

Solid Sapele Flat Edge Door Threshold 200mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 200mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 190mm Wide

Solid Sapele Flat Edge Door Threshold 190mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 190mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 180mm Wide

Solid Sapele Flat Edge Door Threshold 180mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 180mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 170mm Wide

Solid Sapele Flat Edge Door Threshold 170mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 170mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 160mm Wide

Solid Sapele Flat Edge Door Threshold 160mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 160mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 220mm Wide

Solid Sapele Flat Door Threshold 220mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 220mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 210mm Wide

Solid Sapele Flat Door Threshold 210mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 210mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 200mm Wide

Solid Sapele Flat Door Threshold 200mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 200mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 190mm Wide

Solid Sapele Flat Door Threshold 190mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 190mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 180mm Wide

Solid Sapele Flat Door Threshold 180mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 180mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 170mm Wide

Solid Sapele Flat Door Threshold 170mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 170mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 160mm Wide

Solid Sapele Flat Door Threshold 160mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 160mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Reducing Ramp Door Threshold 169mm Wide

Solid Sapele Reducing Ramp Door Threshold 169mm Wide Solid Sapele Reducing Ramp Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm - 15mm - 18mm - 20mm   • Width: 169mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 110mm Wide

Solid Sapele Square Edge Door Threshold 110mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 110mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 110mm Wide

Solid Sapele Flat Door Threshold 110mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 110mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 120mm Wide

Solid Sapele Flat Edge Door Threshold 120mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 120mm Wide

Solid Sapele Flat Door Threshold 120mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 120mm Wide

Solid Sapele Square Edge Door Threshold 120mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Reducing Ramp Door Threshold 144mm Wide

Solid Sapele Reducing Ramp Door Threshold 144mm Wide Solid Sapele Reducing Ramp Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm - 15mm – 18mm - 20mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Reducing Ramp Door Threshold 120mm Wide

Solid Sapele Reducing Ramp Door Threshold 120mm Wide Solid Sapele Reducing Ramp Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Reducing Ramp Door Threshold 70mm Wide

Solid Sapele Reducing Ramp Door Threshold 70mm Wide Solid Sapele Reducing Ramp Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 70mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Reducing Ramp Door Threshold 95mm Wide

Solid Sapele Reducing Ramp Door Threshold 95mm Wide Solid Sapele Reducing Ramp Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 95mm Wide

Solid Sapele Flat Edge Door Threshold 95mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 69mm Wide

Solid Sapele Flat Edge Door Threshold 69mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 69mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 44mm Wide

Solid Sapele Flat Edge Door Threshold 44mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 44mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 35mm Wide

Solid Sapele Flat Edge Door Threshold 35mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 35mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 144mm Wide

Solid Sapele Flat Edge Door Threshold 144mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Door Threshold 130mm Wide

Solid Sapele Flat Edge Door Threshold 130mm Wide Solid Sapele Flat Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 95mm Wide

Solid Sapele Flat Door Threshold 95mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 69mm Wide

Solid Sapele Flat Door Threshold 69mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 69mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 35mm Wide

Solid Sapele Flat Door Threshold 35mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 35mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 44mm Wide

Solid Sapele Flat Door Threshold 44mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 44mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 144mm Wide

Solid Sapele Flat Door Threshold 144mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Door Threshold 130mm Wide

Solid Sapele Flat Door Threshold 130mm Wide Solid Sapele Flat Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 144mm Wide

Solid Sapele Square Edge Door Threshold 144mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 130mm Wide

Solid Sapele Square Edge Door Threshold 130mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 95mm Wide

Solid Sapele Square Edge Door Threshold 95mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 69mm Wide

Solid Sapele Square Edge Door Threshold 69mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 69mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 44mm Wide

Solid Sapele Square Edge Door Threshold 44mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 44mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Edge Door Threshold 35mm Wide

Solid Sapele Square Edge Door Threshold 35mm Wide Solid Sapele Square Edge Door Threshold manufactured from the finest quality Solid African Sapele and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 35mm • Construction: One solid piece - no lamination   Finish Options   • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Edge Cover Beading Threshold Strip 20mm x 8mm

Solid Sapele Flat Edge Cover Beading Threshold Strip 20mm x 8mm Solid Sapele Flat Edge Cover Beading Threshold Strip manufactured from the finest quality Solid African Sapele and is part of our flat edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 8mm   • Width: 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Flat Cover Beading Threshold Strip 20mm x 5mm

Solid Sapele Flat Cover Beading Threshold Strip 20mm x 5mm Solid Sapele Flat Cover Beading Threshold Strip manufactured from the finest quality Solid African Sapele and is part of our flat beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 5mm   • Width: 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to top face   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele L Section Door Threshold 3.0 Metre

Solid Sapele L Section Door Threshold 3.0 Metre Solid Sapele L Section Door Threshold manufactured from the finest quality Solid African Sapele and is part of our L section door threshold collection. Specification • Length: 3000mm - Supplied as one full solid timber length   • Profile Width: 40mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 3.0m = 5-6 screws/pellets, sold separately Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full L section door threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele L Section Door Threshold 2.4 Metre

Solid Sapele L Section Door Threshold 2.4 Metre Solid Sapele L Section Door Threshold manufactured from the finest quality Solid African Sapele and is part of our L section door threshold collection. Specification • Length: 2400mm - Supplied as one full solid timber length   • Profile Width: 40mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 2.4m = 4-5 screws/pellets, sold separately Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full L section door threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele L Section Door Threshold 1.6 Metre

Solid Sapele L Section Door Threshold 1.6 Metre Solid Sapele L Section Door Threshold manufactured from the finest quality Solid African Sapele and is part of our L section door threshold collection. Specification • Length: 1600mm - Supplied as one full solid timber length   • Profile Width: 40mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.6m = 3-4 screws/pellets, sold separately Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full L section door threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele L Section Door Threshold 0.9 Metre

Solid Sapele L Section Door Threshold 0.9 Metre Solid Sapele L Section Door Threshold manufactured from the finest quality Solid African Sapele and is part of our L section door threshold collection. Specification • Length: 900mm - Supplied as one full solid timber length   • Profile Width: 40mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m = 2-3 screws/pellets, sold separately Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full L section door threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele L Section Door Threshold 1.0 Metre

Solid Sapele L Section Door Threshold 1.0 Metre Solid Sapele L Section Door Threshold manufactured from the finest quality Solid African Sapele and is part of our L section door threshold collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Profile Width: 40mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets, sold separately Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full L section door threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele T Bar Threshold 0.9 Metre - 57mm Wide

Solid Sapele T Bar Threshold 0.9 Metre - 57mm Wide Solid Sapele T Bar Threshold manufactured from the finest quality Solid African Sapele and is part of our t bar threshold collection. Specification • Length: 900mm - Supplied as one full solid timber length   • Profile Width: 57mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m = 2-3 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full T bar threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele T Bar Threshold 1.6 Metre - 57mm Wide

Solid Sapele T Bar Threshold 1.6 Metre - 57mm Wide Solid Sapele T Bar Threshold manufactured from the finest quality Solid African Sapele and is part of our t bar threshold collection. Specification • Length: 1600mm - Supplied as one full solid timber length   • Profile Width: 57mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.6m = 3-4 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full T bar threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele T Bar Threshold 2.4 Metre - 57mm Wide

Solid Sapele T Bar Threshold 2.4 Metre - 57mm Wide Solid Sapele T Bar Threshold manufactured from the finest quality Solid African Sapele and is part of our t bar threshold collection. Specification • Length: 2400mm - Supplied as one full solid timber length   • Profile Width: 57mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 2.4m = 4-5 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full T bar threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele T Bar Threshold 3.0 Metre - 57mm Wide

Solid Sapele T Bar Threshold 3.0 Metre - 57mm Wide Solid Sapele T Bar Threshold manufactured from the finest quality Solid African Sapele and is part of our t bar threshold collection. Specification • Length: 3000mm - Supplied as one full solid timber length   • Profile Width: 57mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 3.0m = 5-6 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full T bar threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele T Bar Threshold 1.0 Metre - 57mm Wide

Solid Sapele T Bar Threshold 1.0 Metre - 57mm Wide Solid Sapele T Bar Threshold manufactured from the finest quality Solid African Sapele and is part of our t bar threshold collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Profile Width: 57mm   • Rebate Options: 7mm - 10mm - 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face.   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full T bar threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.