Solid Oak Square Edge Bannister Capping 160mm Wide

Solid Oak Square Edge Bannister Capping 160mm Wide Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 160mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 144mm Wide

Solid Oak Square Edge Bannister Capping 144mm Wide Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 130mm Wide

Solid Oak Square Edge Bannister Capping 130mm Wide Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 120mm Wide

Solid Oak Square Edge Bannister Capping 120mm Wide Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 110mm Wide

Solid Oak Square Edge Bannister Capping 110mm Wide Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 110mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 95mm Wide

Solid Oak Square Edge Bannister Capping 95mm Wide Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Bannister Capping 69mm Wide

Solid Oak Square Edge Bannister Capping 69mm Wide Solid Oak Square Edge Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 69mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 160mm Wide

Solid Oak Bullnose Bannister Capping 160mm Wide Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 160mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 144mm Wide

Solid Oak Bullnose Bannister Capping 144mm Wide Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 130mm Wide

Solid Oak Bullnose Bannister Capping 130mm Wide Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 120mm Wide

Solid Oak Bullnose Bannister Capping 120mm Wide Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 110mm Wide

Solid Oak Bullnose Bannister Capping 110mm Wide Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 110mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 95mm Wide

Solid Oak Bullnose Bannister Capping 95mm Wide Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Bullnose Bannister Capping 69mm Wide

Solid Oak Bullnose Bannister Capping 69mm Wide Solid Oak Bullnose Bannister Capping is manufactured from the finest quality American Oak and is part of our stair capping collection. Specification • Length Options: 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 69mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 1.0 = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Capping range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.