Pine Bullnose Single Groove Architrave Lengths

Pine Bullnose Single Groove Architrave Lengths  Pine Bullnose Single Groove Architrave Lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm    • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Chamfered Single Edge Architrave Lengths

Pine Chamfered Single Edge Architrave Lengths  Pine Chamfered Single Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm    • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Single Edge Architrave Lengths

Pine Square Single Edge Architrave Lengths  Pine Square Single Edge Architrave lengths are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm    • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bullnose Single Edge Architrave Lengths

Pine Bullnose Single Edge Architrave Lengths  Pine Bullnose Single Edge Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm    • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Pine Cromwell Door Architrave Sets

Pine Cromwell Door Architrave Sets  Our Pine Cromwell Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Internal Rebated Door Frame - 106mm Wide

Pine Internal Rebated Door Frame - 106mm Wide   Pine Internal 106mm Wide Rebated Door Frame is manufactured from the finest quality Pine and is part of our door frame collection. Specification • Frame Depth: 106mm   • Frame Thickness: 32mm• Door Size: The frame head is 1000mm on a Single Door frame and 2100mm on a Double Door frame. The head is untrenched and will need to be trenched to suit your door size by a professional fitter.   • Rebate Cut Out: 35mm x 12mm (suitable for 35mm thick doors)   • Single Door Frame Option: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Frame Option: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint    • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A)    • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately. • Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door frame range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Internal Rebated Door Frame - 119mm Wide

Pine Internal Rebated Door Frame - 119mm Wide  Pine Internal 119mm Wide Rebated Door Frame is manufactured from the finest quality Pine and is part of our door frame collection. Specification • Frame Depth: 119mm   • Frame Thickness: 32mm• Door Size: The frame head is 1000mm on a Single Door frame and 2100mm on a Double Door frame. The head is untrenched and will need to be trenched to suit your door size by a professional fitter.   • Rebate Cut Out: 35mm x 12mm (suitable for 35mm thick doors)   • Single Door Frame Option: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Frame Option: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately. • Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door frame range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Internal Rebated Door Frame - 138mm Wide

Pine Internal Rebated Door Frame - 138mm Wide  Pine Internal 138mm Wide Rebated Door Frame is manufactured from the finest quality Pine and is part of our door frame collection. Specification • Frame Depth: 138mm   • Frame Thickness: 32mm• Door Size: The frame head is 1000mm on a Single Door frame and 2100mm on a Double Door frame. The head is untrenched and will need to be trenched to suit your door size by a professional fitter.   • Rebate Cut Out: 35mm x 12mm (suitable for 35mm thick doors)   • Single Door Frame Option: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Frame Option: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately. • Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door frame range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Internal Rebated Door Frame - 131mm Wide

Pine Internal Rebated Door Frame - 131mm Wide  Pine Internal 131mm Wide Rebated Door Frame is manufactured from the finest quality Pine and is part of our door frame collection. Specification • Frame Depth: 131mm   • Frame Thickness: 32mm• Door Size: The frame head is 1000mm on a Single Door frame and 2100mm on a Double Door frame. The head is untrenched and will need to be trenched to suit your door size by a professional fitter.   • Rebate Cut Out: 35mm x 12mm (suitable for 35mm thick doors)   • Single Door Frame Option: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Frame Option: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately. • Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door frame range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Internal Rebated Door Frame - 144mm Wide

Pine Internal Rebated Door Frame - 144mm Wide  Pine Internal 144mm Wide Rebated Door Frame is manufactured from the finest quality Pine and is part of our door frame collection. Specification • Frame Depth: 144mm   • Frame Thickness: 32mm• Door Size: The frame head is 1000mm on a Single Door frame and 2100mm on a Double Door frame. The head is untrenched and will need to be trenched to suit your door size by a professional fitter.   • Rebate Cut Out: 35mm x 12mm (suitable for 35mm thick doors)   • Single Door Frame Option: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Frame Option: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately. • Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door frame range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Internal Rebated Door Frame - 169mm Wide

Pine Internal Rebated Door Frame - 169mm Wide  Pine Internal 169mm Wide Rebated Door Frame is manufactured from the finest quality Pine and is part of our door frame collection. Specification • Frame Depth: 169mm   • Frame Thickness: 32mm• Door Size: The frame head is 1000mm on a Single Door frame and 2100mm on a Double Door frame. The head is untrenched and will need to be trenched to suit your door size by a professional fitter.   • Rebate Cut Out: 35mm x 12mm (suitable for 35mm thick doors)   • Single Door Frame Option: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Frame Option: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately. • Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door frame range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Internal Rebated Door Frame - 95mm Wide

Pine Internal Rebated Door Frame - 95mm Wide  Pine Internal 95mm Wide Rebated Door Frame is manufactured from the finest quality Pine and is part of our door frame collection. Specification • Frame Depth: 95mm    • Frame Thickness: 32mm• Door Size: The frame head is 1000mm on a Single Door frame and 2100mm on a Double Door frame. The head is untrenched and will need to be trenched to suit your door size by a professional fitter.  • Rebate Cut Out: 35mm x 12mm (suitable for 35mm thick doors)   • Single Door Frame Option: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Frame Option: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (Grade A)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads, these are sold separately. • Screw and Pellet Recommendation Per Set: Single Door Set = 8-10 and Double Door Set = 9-12. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door frame range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Single Edge Panelling 3 Metre

Pine Square Single Edge Panelling 3 Metre  Pine Square Single Edge Panelling is manufactured from the finest quality Pine and is part of our panelling collection. Specification • Width Options: 69mm - 80mm - 95mm - 100mm - 110mm - 119mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 20mm  • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished   • Product Size in Image: 69mm Panelling shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full panelling collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Single Edge Picture Rail 3 Metre

Pine Square Single Edge Picture Rail 3 Metre Pine Square Single Edge Picture Rail is manufactured from the finest quality Pine and is part of our modern picture rail collection. Specification • Height Options: 69mm - 80mm - 95mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm • Construction: One solid piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished   • Product Size in Image: 69mm Picture Rail shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern picture rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bullnose Single Groove Picture Rail 3 Metre

Pine Bullnose Single Groove Picture Rail 3 Metre Pine Bullnose Single Groove Picture Rail is manufactured from the finest quality Pine and is part of our modern picture rail collection. Specification • Height Options: 40mm - 50mm - 60mm - 69mm - 80mm - 95mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm • Construction: One solid piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished   • Product Size in Image: 69mm Picture Rail shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)    • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern picture rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Single Edge Dado Rail 3 Metre

Pine Square Single Edge Dado Rail 3 Metre  Pine Square Single Edge Dado Rail is manufactured from the finest quality Pine and is part of our modern dado rail collection. Specification • Height Options: 69mm - 80mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished   • Product Size in Image: 69mm Dado shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern dado rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bullnose Single Groove Dado Rail 3 Metre

Pine Bullnose Single Groove Dado Rail 3 Metre  Pine Bullnose Single Groove Dado Rail is manufactured from the finest quality Pine and is part of our modern dado rail collection. Specification • Height Options: 40mm - 50mm - 60mm - 69mm - 80mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished   • Product Size in Image: 69mm Dado shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern dado rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine 10mm Tapered Single Pellet

Pine 10mm Tapered Single Pellet Pine 10mm Tapered Pellet manufactured from the finest quality Pine and is part of our tapered pellet collection. Specification • Drill Size Diameter: 10mm • Construction: One solid piece - no lamination Technical Information • Product Sizes: This product is supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Dry Area • Pack Quantity: 1 (Sold in singles) Timber Specie Information • Specie: Pine - with knots   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full tapered pellet collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Pine 8mm Tapered Single Pellet

Pine 8mm Tapered Single Pellet Pine 8mm Tapered Pellet manufactured from the finest quality Pine and is part of our tapered pellet collection. Specification • Drill Size Diameter: 8mm • Construction: One solid piece - no lamination Technical Information • Product Sizes: This product is supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Dry Area • Pack Quantity: 1 (Sold in singles) Timber Specie Information • Specie: Pine - with knots   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full tapered pellet collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Pine 12mm Tapered Single Pellet

Pine 12mm Tapered Single Pellet Pine 12mm Tapered Pellet manufactured from the finest quality Pine and is part of our tapered pellet collection. Specification • Drill Size Diameter: 12mm • Construction: One solid piece - no lamination Technical Information • Product Sizes: This product is supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Dry Area • Pack Quantity: 1 (Sold in singles) Timber Specie Information • Specie: Pine - with knots   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full tapered pellet collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Pine Bullnose Single Groove Door Architrave Sets

Pine Bullnose Single Groove Door Architrave Sets  Our Pine Bullnose Single Groove Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bullnose Single Groove Skirting 3.5 metre

Pine Bullnose Single Groove Skirting 3.5 metre  Our Pine Bullnose Single Groove Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Tudor Door Architrave Sets

Pine Tudor Architrave Sets  Our Pine Tudor Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Heritage Door Architrave Sets

Pine Heritage Door Architrave Sets  Our Pine Heritage Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Long Chamfer Door Architrave Sets

Pine Long Chamfer Door Architrave Sets  Our Pine Long Chamfer Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Ovolo Door Architrave Sets

Pine Ovolo Door Architrave Sets  Our Pine Ovolo Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Windsor Door Architrave Sets

Pine Windsor Door Architrave Sets  Our Pine Windsor Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Tulip Door Architrave Sets

Pine Tulip Door Architrave Sets  Our Pine Tulip Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Torus Door Architrave Sets

Pine Torus Door Architrave Sets  Our Pine Torus Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Henley Door Architrave Sets

Pine Henley Door Architrave Sets  Our Pine Henley Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Scotia Door Architrave Sets

Pine Scotia Door Architrave Sets  Our Pine Scotia Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Orchard Door Architrave Sets

Pine Orchard Door Architrave Sets  Our Pine Orchard Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Hove Door Architrave Sets

Pine Hove Door Architrave Sets  Our Pine Hove Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Flute Door Architrave Sets

Pine Flute Door Architrave Sets  Our Pine Flute Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Warwick Door Architrave Sets

Pine Warwick Door Architrave Sets  Our Pine Warwick Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bevel Door Architrave Sets

Pine Bevel Door Architrave Sets  Our Pine Bevel Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bromley Door Architrave Sets

Pine Bromley Door Architrave Sets  Our Pine Bromley Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Mini Chamfered Door Architrave Sets

Pine Mini Chamfered Door Architrave Sets  Our Pine Mini Chamfered Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Truro Door Architrave Sets

Pine Truro Door Architrave Sets  Our Pine Truro Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Wells Door Architrave Sets

Pine Wells Door Architrave Sets  Our Pine Wells Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)• Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Ogee Door Architrave Sets

Pine Ogee Door Architrave Sets  Our Pine Ogee Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Cambridge Door Architrave Sets

Pine Cambridge Door Architrave Sets  Our Pine Cambridge Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Triple Edge Door Architrave Sets

Pine Square Triple Edge Door Architrave Sets  Our Pine Square Triple Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Double Edge Door Architrave Sets

Pine Square Double Edge Door Architrave Sets  Our Pine Square Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bullnose Single Edge Door Architrave Sets

Pine Bullnose Single Edge Door Architrave Sets  Our Pine Bullnose Single Edge Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bullnose Single Edge Skirting 3.5 metre

Pine Bullnose Single Edge Skirting 3.5 metre  Our Pine Bullnose Single Edge Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)     • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bullnose Double Edge Door Architrave Sets

Pine Bullnose Double Edge Door Architrave Sets  Our Pine Bullnose Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Chamfered Triple Edge Door Architrave Sets

Pine Chamfered Triple Edge Door Architrave Sets  Our Pine Chamfered Triple Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Chamfered Double Edge Door Architrave Sets

Pine Chamfered Double Edge Door Architrave Sets  Our Pine Chamfered Double Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Chamfered Single Edge Door Architrave Sets

Pine Chamfered Single Edge Door Architrave Sets  Our Pine Chamfered Single Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Chamfered Single Edge Skirting 3.5 metre

Pine Chamfered Single Edge Skirting 3.5 metre  Our Pine Chamfered Single Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Single Edge Door Architrave Sets

Pine Square Single Edge Door Architrave Sets  Our Pine Square Single Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Single Edge Skirting 3.5 metre

Pine Square Single Edge Skirting 3.5 metre  Our Pine Square Single Edge Skirting is manufactured from Pine and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image) • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Bullnose Door Architrave Sets

Pine Bullnose Door Architrave Sets  Our Pine Bullnose Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Chamfered Door Architrave Sets

Pine Chamfered Door Architrave Sets  Our Pine Chamfered Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Pencil Round Door Architrave Sets

Pine Pencil Round Door Architrave Sets  Our Pine Pencil Round Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Edge Door Architrave Sets

Pine Square Edge Door Architrave Sets  Our Pine Square Edge Architrave sets are manufactured from the finest quality Pine and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Regent Door Architrave Sets

Pine Regent Door Architrave Sets  Our Pine Regent Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Lambs Tongue Door Architrave Sets

Pine Lambs Tongue Door Architrave Sets  Our Pine Lambs Tongue Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Knightsbridge Door Architrave Sets

Pine Knightsbridge Door Architrave Sets  Our Pine Knightsbridge Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Winchester Door Architrave Sets

Pine Winchester Door Architrave Sets  Our Pine Winchester Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.