Solid Oak Bullnose Door Stopper Sets - 55mm Wide

Solid Oak Bullnose Door Stopper Sets - 55mm Wide Solid Oak Bullnose Door Stopper Sets are manufactured from the finest quality American Oak and are part of our door stopper sets collection. Specification • Width: 55mm • Thickness Options: 12mm - 15mm - 18mm - 20mm - 22mm - 25mm   • Single Door Stopper Set Options: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Stopper Set Options: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door stopper range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Edge Door Stopper Sets - 55mm Wide

Solid Oak Square Edge Door Stopper Sets - 55mm Wide Solid Oak Square Edge Door Stopper Sets are manufactured from the finest quality American Oak and are part of our door stopper sets collection. Specification • Width: 55mm • Thickness Options: 12mm - 15mm - 18mm - 20mm - 22mm - 25mm   • Single Door Stopper Set Options: 2 x 2100mm & 1 x 1000mm pieces supplied   • Double Door Stopper Set Options: 3 x 2100mm pieces supplied   • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full door stopper range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak PAR Timber 55mm Wide

Solid Oak PAR Timber 55mm Wide  Solid Oak PAR Timber manufactured from the finest quality American Oak. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 55mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak White Primed External Door Reversible Weather Bar Clearance

Solid Oak White Primed External Door Reversible Weather Bar Clearance  Solid Oak White Primed External Door Reversible Weather Bar is manufactured from the finest quality American Oak and is part of our weather bar collection. Specification • Size: 55mm x 45mm (Reversible)   • Length Options: 1000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options    • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to front face   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in White Primed Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads.   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full weatherboard range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak PAR Timber 155mm Wide

Solid Oak PAR Timber 155mm Wide  Solid Oak PAR Timber manufactured from the finest quality American Oak. Specification • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 9mm - 12mm – 15mm – 18mm - 20mm - 22mm – 25mm   • Width: 155mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length:1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 4-5 screws/pellets, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Flat Square Edge Beading Strip 25mm x 5mm

Solid Oak Flat Square Edge Beading Strip 25mm x 5mm Solid Oak Flat Square Edge Beading Strip manufactured from the finest quality American Oak and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 5mm   • Width: 25mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Flat Edge Cover Beading Threshold Strip 25mm x 5mm

Solid Oak Flat Edge Cover Beading Threshold Strip 25mm x 5mm  Solid Oak Flat Edge Cover Beading Threshold Strip manufactured from the finest quality American Oak and is part of our flat edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 5mm   • Width: 25mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Flat Edge Cover Beading Threshold Strip 15mm x 5mm

Solid Oak Flat Edge Cover Beading Threshold Strip 15mm x 5mm  Solid Oak Flat Edge Cover Beading Threshold Strip manufactured from the finest quality American Oak and is part of our flat edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 5mm   • Width: 15mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Flat Square Edge Beading Strip 15mm x 5mm

Solid Oak Flat Square Edge Beading Strip 15mm x 5mm Solid Oak Flat Square Edge Beading Strip manufactured from the finest quality American Oak and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 5mm   • Width: 15mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak External Door Reversible Weather Bar

Solid Oak External Door Reversible Weather Bar  Solid Oak External Door Reversible Weather Bar is manufactured from the finest quality American Oak and is part of our weather bar collection. Specification • Size: 55mm x 45mm (Reversible)   • Length Options: 1000mm - 2000mm - 3000mm - Supplied as one full solid timber length • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to front face   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads.   • Screw and Pellet Recommendation Per Length: 1.0m = 2-3 screws/pellets - 2.0m = 3-4 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full weatherboard range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.