Solid Beech Square Triple Edge Architrave Lengths

Solid Beech Square Triple Edge Architrave Lengths Solid Beech Square Triple Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Architrave Lengths

Solid Beech Square Edge Architrave Lengths Solid Beech Square Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Single Edge Architrave Lengths

Solid Beech Square Single Edge Architrave Lengths Solid Beech Square Single Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Double Edge Architrave Lengths

Solid Beech Square Double Edge Architrave Lengths Solid Beech Square Double Edge Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm - 119mm   • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Shelf 2.4 metre x 20mm

Solid Beech Square Edge Shelf 2.4 metre x 20mm Solid Beech Square Edge Shelf manufactured from the finest quality Solid European Steamed Beech and is part of our shelving collection. Specification • Length: 2400mm - Supplied as one full solid timber length   • Thickness: 20mm   • Depth Options: 69mm - 80mm - 95mm - 110mm - 119mm - 130mm - 145mm - 160mm - 169mm - 180mm - 195mm – 210mm - 219mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: This product is not supplied with any fixings and these must be purchased separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Shelving collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Window Board 2.4 metre x 20mm

Solid Beech Square Edge Window Board 2.4 metre x 20mm Solid Beech Square Edge Window Board manufactured from the finest quality Solid European Steamed Beech and is part of our window board collection. Specification • Length: 2400mm - Supplied as one full solid timber length   • Thickness: 20mm   • Depth Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm – 219mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides. Top face and front edge.   • Out of Sight: The bottom and the back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 219mm Window Board shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.   • Product Usage: This product must be installed as a window board and cannot be used as a shelf Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Window Boards collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Window Board 3 metre x 25mm

Solid Beech Square Edge Window Board 3 metre x 25mm Solid Beech Square Edge Window Board manufactured from the finest quality Solid European Steamed Beech and is part of our window board collection. Specification • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 25mm   • Depth Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm - 245mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides. Top face and front edge.   • Out of Sight: The bottom and the back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 219mm Window Board shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately.   • Product Usage: This product must be installed as a window board and cannot be used as a shelf Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Window Boards collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Panelling 3 Metre

Solid Beech Square Edge Panelling 3 Metre Solid Beech Square Edge Panelling is manufactured from the finest quality Solid European Steamed Beech and is part of our panelling collection. Specification • Width Options: 30mm - 40mm - 50mm - 60mm - 69mm - 80mm - 95mm - 100mm - 110mm - 119mm - 130mm - 144mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm - 15mm - 18mm - 20mm  • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 69mm Panelling shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full panelling collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Shelf 1 metre x 25mm

Solid Beech Square Edge Shelf 1 metre x 25mm Solid Beech Square Edge Shelf manufactured from the finest quality Solid European Steamed Beech and is part of our shelving collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Thickness: 25mm   • Depth Options: 69mm - 80mm - 95mm - 110mm - 119mm - 130mm - 145mm - 160mm - 169mm - 180mm - 195mm - 210mm - 219mm - 230mm - 245mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: This product is not supplied with any fixings and these must be purchased separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Shelving collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Shelf 2 metre x 25mm

Solid Beech Square Edge Shelf 2 metre x 25mm Solid Beech Square Edge Shelf manufactured from the finest quality Solid European Steamed Beech and is part of our shelving collection. Specification • Length: 2000mm - Supplied as one full solid timber length   • Thickness: 25mm   • Depth Options: 69mm - 80mm - 95mm - 110mm - 119mm - 130mm - 145mm - 160mm - 169mm - 180mm - 195mm - 210mm - 219mm - 230mm - 245mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: This product is not supplied with any fixings and these must be purchased separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Shelving collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Window Board 3 metre x 20mm

Solid Beech Square Edge Window Board 3 metre x 20mm Solid Beech Square Edge Window Board manufactured from the finest quality Solid European Steamed Beech and is part of our window board collection. Specification • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Depth Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm – 219mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides. Top face and front edge.   • Out of Sight: The bottom and the back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 219mm Window Board shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately.   • Product Usage: This product must be installed as a window board and cannot be used as a shelf Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Window Boards collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Window Board 2 metre x 20mm

Solid Beech Square Edge Window Board 2 metre x 20mm Solid Beech Square Edge Window Board manufactured from the finest quality Solid European Steamed Beech and is part of our window board collection. Specification • Length: 2000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Depth Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm – 219mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides. Top face and front edge.   • Out of Sight: The bottom and the back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 219mm Window Board shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 3-4 screws/pellets are recommended for this length, sold separately.   • Product Usage: This product must be installed as a window board and cannot be used as a shelf Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Window Boards collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Window Board 1 metre x 20mm

Solid Beech Square Edge Window Board 1 metre x 20mm Solid Beech Square Edge Window Board manufactured from the finest quality Solid European Steamed Beech and is part of our window board collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Depth Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm – 219mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides. Top face and front edge.   • Out of Sight: The bottom and the back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 219mm Window Board shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 2-3 screws/pellets are recommended for this length, sold separately.   • Product Usage: This product must be installed as a window board and cannot be used as a shelf Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Window Boards collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Triple Edge Architrave Sets

Solid Beech Square Triple Edge Architrave Sets  Solid Beech Square Triple Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Double Edge Architrave Sets

Solid Beech Square Double Edge Architrave Sets  Solid Beech Square Double Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Architrave Sets

Solid Beech Square Edge Architrave Sets  Solid Beech Square Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Single Edge Architrave Sets

Solid Beech Square Single Edge Architrave Sets  Solid Beech Square Single Edge Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Triple Edge Skirting 3 metre

  Solid Beech Square Triple Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Double Edge Skirting 3 metre

  Solid Beech Square Double Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Single Edge Skirting 3 metre

  Solid Beech Square Single Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Skirting 3 metre

  Solid Beech Square Edge Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our modern skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 20mm x 20mm

Solid Beech Square Beading 20mm x 20mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 20mm   • Profile Depth: 20mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 15mm x 15mm

Solid Beech Square Beading 15mm x 15mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 12mm x 12mm

Solid Beech Square Beading 12mm x 12mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 18mm x 18mm

Solid Beech Square Beading 18mm x 18mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 9mm x 9mm

Solid Beech Square Beading 9mm x 9mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Door Threshold 144mm Wide

Solid Beech Square Edge Door Threshold 144mm Wide Solid Beech Square Edge Door Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 144mm • Construction: One solid piece - no lamination   Finish Options   • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Door Threshold 130mm Wide

Solid Beech Square Edge Door Threshold 130mm Wide Solid Beech Square Edge Door Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options   • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Door Threshold 95mm Wide

Solid Beech Square Edge Door Threshold 95mm Wide Solid Beech Square Edge Door Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 95mm • Construction: One solid piece - no lamination   Finish Options   • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Door Threshold 69mm Wide

Solid Beech Square Edge Door Threshold 69mm Wide Solid Beech Square Edge Door Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 69mm • Construction: One solid piece - no lamination   Finish Options   • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Door Threshold 44mm Wide

Solid Beech Square Edge Door Threshold 44mm Wide Solid Beech Square Edge Door Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 44mm • Construction: One solid piece - no lamination   Finish Options   • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Door Threshold 35mm Wide

Solid Beech Square Edge Door Threshold 35mm Wide Solid Beech Square Edge Door Threshold manufactured from the finest quality Solid European Steamed Beech and is part of our flooring threshold collection. Specification • Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm – 15mm – 18mm - 20mm   • Width: 35mm • Construction: One solid piece - no lamination   Finish Options   • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads   • Screw and Pellet Recommendation Per Length: 0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flooring threshold range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Shelf 3 metre x 20mm

Solid Beech Square Edge Shelf 3 metre x 20mm Solid Beech Square Edge Shelf manufactured from the finest quality Solid European Steamed Beech and is part of our shelving collection. Specification • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Depth Options: 69mm - 80mm - 95mm - 110mm - 119mm - 130mm - 145mm - 160mm - 169mm - 180mm - 195mm – 210mm - 219mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: This product is not supplied with any fixings and these must be purchased separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Shelving collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Shelf 2 metre x 20mm

Solid Beech Square Edge Shelf 2 metre x 20mm Solid Beech Square Edge Shelf manufactured from the finest quality Solid European Steamed Beech and is part of our shelving collection. Specification • Length: 2000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Depth Options: 69mm - 80mm - 95mm - 110mm - 119mm - 130mm - 145mm - 160mm - 169mm - 180mm - 195mm – 210mm - 219mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: This product is not supplied with any fixings and these must be purchased separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Shelving collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Shelf 1 metre x 20mm

Solid Beech Square Edge Shelf 1 metre x 20mm Solid Beech Square Edge Shelf manufactured from the finest quality Solid European Steamed Beech and is part of our shelving collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Depth Options: 69mm - 80mm - 95mm - 110mm - 119mm - 130mm - 145mm - 160mm - 169mm - 180mm - 195mm – 210mm - 219mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)  • Selected Finish Option: Applied to 3 sides. Top face, front and bottom.   • Out of Sight: The back and ends of this product are not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: This product is not supplied with any fixings and these must be purchased separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Shelving collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 140mm x 7mm

Solid Beech Flat Square Edge Beading Strip 140mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 140mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 130mm x 7mm

Solid Beech Flat Square Edge Beading Strip 130mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 130mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 120mm x 7mm

Solid Beech Flat Square Edge Beading Strip 120mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 120mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)  • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 110mm x 7mm

Solid Beech Flat Square Edge Beading Strip 110mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 110mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)  • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 100mm x 7mm

Solid Beech Flat Square Edge Beading Strip 100mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 100mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)  • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 90mm x 7mm

Solid Beech Flat Square Edge Beading Strip 90mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 90mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)  • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 80mm x 7mm

Solid Beech Flat Square Edge Beading Strip 80mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 80mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 70mm x 7mm

Solid Beech Flat Square Edge Beading Strip 70mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 70mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)  • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 60mm x 7mm

Solid Beech Flat Square Edge Beading Strip 60mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 60mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)  • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 50mm x 7mm

Solid Beech Flat Square Edge Beading Strip 50mm x 7mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 7mm   • Width: 50mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Flat Square Edge Beading Strip 40mm x 5mm

Solid Beech Flat Square Edge Beading Strip 40mm x 5mm Solid Beech Flat Square Edge Beading Strip manufactured from the finest quality Solid European Steamed Beech and is part of our flat square edge beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 5mm   • Width: 40mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax* • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)  • Selected Finish Option: Applied to the top face and the 2 small sides   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full flat square edge beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Window Board 2.4 metre x 25mm

Solid Beech Square Edge Window Board 2.4 metre x 25mm Solid Beech Square Edge Window Board manufactured from the finest quality Solid European Steamed Beech and is part of our window board collection. Specification • Length: 2400mm - Supplied as one full solid timber length   • Thickness: 25mm   • Depth Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm - 245mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides. Top face and front edge.   • Out of Sight: The bottom and the back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 219mm Window Board shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.   • Product Usage: This product must be installed as a window board and cannot be used as a shelf Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Window Boards collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Window Board 2 metre x 25mm

Solid Beech Square Edge Window Board 2 metre x 25mm Solid Beech Square Edge Window Board manufactured from the finest quality Solid European Steamed Beech and is part of our window board collection. Specification • Length: 2000mm - Supplied as one full solid timber length   • Thickness: 25mm   • Depth Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm - 245mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides. Top face and front edge.   • Out of Sight: The bottom and the back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 219mm Window Board shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 3-4 screws/pellets are recommended for this length, sold separately.   • Product Usage: This product must be installed as a window board and cannot be used as a shelf Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Window Boards collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Window Board 1 metre x 25mm

Solid Beech Square Edge Window Board 1 metre x 25mm Solid Beech Square Edge Window Board manufactured from the finest quality Solid European Steamed Beech and is part of our window board collection. Specification • Length: 1000mm - Supplied as one full solid timber length   • Thickness: 25mm   • Depth Options: 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm - 245mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides. Top face and front edge.   • Out of Sight: The bottom and the back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish   • Product Size in Image: 219mm Window Board shown in product image, to view profile refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 2-3 screws/pellets are recommended for this length, sold separately.   • Product Usage: This product must be installed as a window board and cannot be used as a shelf Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full Window Boards collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Edge Kitchen Worktop Upstand 3 Metre

  Manufactured from the finest quality Solid European Steamed Beech and is part of our upstand collection. Specification • Height Options: 30mm - 40mm - 50mm - 60mm - 70mm - 80mm - 90mm - 100mm - 110mm - 120mm - 130mm - 140mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness Options: 12mm - 15mm - 18mm - 20mm • Construction: One solid piece - no lamination   Finish Options    • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full upstand collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.