Pine Panel Moulding M20 - 34mm x 12mm

Pine Panel Moulding M20 - 34mm x 12mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 34mm   • Width: 12mm • Construction: Laminated   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image) Timber Specie Information •  Specie: Pine (with untreated knots)  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M19 - 21mm x 9mm

Pine Panel Moulding M19 - 21mm x 9mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 21mm   • Width: 9mm • Construction: Laminated   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image) Timber Specie Information •  Specie: Pine (with untreated knots)  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M18 - 29mm x 15mm

Pine Panel Moulding M18 - 29mm x 15mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 15mm   • Width: 29mm • Construction: Laminated   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image) Timber Specie Information •  Specie: Pine (with untreated knots)  • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 15mm x 9mm

Pine Rectangle Beading 15mm x 9mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 12mm   • Width: 9mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Moulding M17 - 34mm x 12mm

Pine Moulding M17 - 34mm x 12mm Pine Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 12mm   • Width: 34mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front face   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Moulding M16 - 32mm x 21mm

Pine Moulding M16 - 32mm x 21mm Pine Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 21mm   • Width: 32mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Corner Angle Moulding 32mm x 32mm

Pine Square Corner Angle Moulding 32mm x 32mm Pine Square Corner Angle Moulding is manufactured from the finest quality Pine and is part of our cushion moulding collection. Specification • External Size: 32mm x 32mm*   • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 4mm • Construction: Pine laminated   *For information on the internal size dimensions please refer to our technical image   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 2 external sides   • Out of Sight: The internal 2 sides of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine - with knots   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full cushion moulding range collection: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Quadrant Beading 9mm x 9mm

Pine Quadrant Beading 9mm x 9mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Pine Quadrant Beading 12mm x 12mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Ready to apply a protective finish   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1 Timber Specie Information • Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and adhesive Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Quadrant Beading 12mm x 12mm

Pine Quadrant Beading 12mm x 12mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Quadrant Beading 15mm x 15mm

Pine Quadrant Beading 15mm x 15mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Quadrant Beading 18mm x 18mm

Pine Quadrant Beading 18mm x 18mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Quadrant Beading 21mm x 21mm

Pine Quadrant Beading 21mm x 21mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 21mm   • Profile Depth: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Quadrant Beading 6mm x 6mm

Pine Quadrant Beading 6mm x 6mm Pine Quadrant Beading manufactured from the finest quality Pine and is part of our quadrant beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 6mm   • Profile Depth: 6mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full quadrant beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Scotia Beading 12mm x 12mm

Pine Scotia Beading 12mm x 12mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Scotia Beading 9mm x 9mm

Pine Scotia Beading 9mm x 9mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Scotia Beading 30mm x 30mm

Pine Scotia Beading 30mm x 30mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 30mm   • Profile Depth: 30mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Scotia Beading 21mm x 21mm

Pine Scotia Beading 21mm x 21mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 21mm   • Profile Depth: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Scotia Beading 18mm x 18mm

Pine Scotia Beading 18mm x 18mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 18mm x 15mm

Pine Rectangle Beading 18mm x 15mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 15mm   • Width: 18mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 21mm x 15mm

Pine Rectangle Beading 21mm x 15mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 15mm   • Width: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 21mm x 12mm

Pine Rectangle Beading 21mm x 12mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 12mm   • Width: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 18mm x 12mm

Pine Rectangle Beading 18mm x 12mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 12mm   • Width: 18mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 21mm x 9mm

Pine Rectangle Beading 21mm x 9mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 9mm   • Width: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 15mm x 12mm

Pine Rectangle Beading 15mm x 12mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 12mm   • Width: 15mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 18mm x 9mm

Pine Rectangle Beading 18mm x 9mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 9mm   • Width: 18mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Rectangle Beading 12mm x 9mm

Pine Rectangle Beading 12mm x 9mm Pine Rectangle Beading manufactured from the finest quality Pine and is part of our rectangle beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 9mm   • Width: 12mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine PSE Stripwood 34mm x 9mm

Pine PSE Stripwood 34mm x 9mm Pine PSE Stripwood manufactured from the finest quality Pine and is part of our PSE collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 9mm   • Width: 34mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. One large side and two small sides   • Out of Sight: The remaining large side of this product will not be sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full rectangle beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Scotia Beading 15mm x 15mm

Pine Scotia Beading 15mm x 15mm Pine Scotia Beading manufactured from the finest quality Pine and is part of our scotia beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to the front curvature    • Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full scotia beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 18mm x 18mm

Pine Square Beading 18mm x 18mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 21mm x 21mm

Pine Square Beading 21mm x 21mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 21mm   • Profile Depth: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 15mm x 15mm

Pine Square Beading 15mm x 15mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 12mm x 12mm

Pine Square Beading 12mm x 12mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 9mm x 9mm

Pine Square Beading 9mm x 9mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M12 - 15mm x 8mm

Pine Panel Moulding M12 - 15mm x 8mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 8mm   • Width: 15mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M13 - 21mm x 8mm

Pine Panel Moulding M13 - 21mm x 8mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 8mm   • Width: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M9 - 34mm x 12mm

Pine Panel Moulding M9 - 34mm x 12mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 12mm   • Width: 34mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M8 - 21mm x 9mm

Pine Panel Moulding M8 - 21mm x 9mm Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Thickness: 9mm   • Width: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Top face, left and right side   • Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full decorative panel moulding collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.