Solid Ash Square Beading 20mm x 20mm

Solid Ash Square Beading 20mm x 20mm Solid Ash Square Beading manufactured from the finest quality North American Ash and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 20mm   • Profile Depth: 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Ash Lacquered: Gloss Finish - Two coats of clear lacquer*   • Ash Oiled: Matt Finish - one coat of light golden oil*    • Ash Waxed: Soft Sheen Finish - Medium-brown wax*   • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Beading 18mm x 18mm

Solid Ash Square Beading 18mm x 18mm Solid Ash Square Beading manufactured from the finest quality North American Ash and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Ash Lacquered: Gloss Finish - Two coats of clear lacquer*   • Ash Oiled: Matt Finish - one coat of light golden oil*    • Ash Waxed: Soft Sheen Finish - Medium-brown wax*   • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Beading 15mm x 15mm

Solid Ash Square Beading 15mm x 15mm Solid Ash Square Beading manufactured from the finest quality North American Ash and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Ash Lacquered: Gloss Finish - Two coats of clear lacquer*   • Ash Oiled: Matt Finish - one coat of light golden oil*    • Ash Waxed: Soft Sheen Finish - Medium-brown wax*   • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Beading 12mm x 12mm

Solid Ash Square Beading 12mm x 12mm Solid Ash Square Beading manufactured from the finest quality North American Ash and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Ash Lacquered: Gloss Finish - Two coats of clear lacquer*   • Ash Oiled: Matt Finish - one coat of light golden oil*    • Ash Waxed: Soft Sheen Finish - Medium-brown wax*   • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Beading 9mm x 9mm

Solid Ash Square Beading 9mm x 9mm Solid Ash Square Beading manufactured from the finest quality North American Ash and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Ash Lacquered: Gloss Finish - Two coats of clear lacquer*   • Ash Oiled: Matt Finish - one coat of light golden oil*    • Ash Waxed: Soft Sheen Finish - Medium-brown wax*   • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Square Beading 20mm x 20mm

Solid Walnut Square Beading 20mm x 20mm Solid Walnut Square Beading manufactured from the finest quality American Black Walnut and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 20mm   • Profile Depth: 20mm • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax*   • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish*   • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish*   • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish*   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Square Beading 12mm x 12mm

Solid Walnut Square Beading 12mm x 12mm Solid Walnut Square Beading manufactured from the finest quality American Black Walnut and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax*   • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish*   • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish*   • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish*   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Square Beading 18mm x 18mm

Solid Walnut Square Beading 18mm x 18mm Solid Walnut Square Beading manufactured from the finest quality American Black Walnut and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax*   • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish*   • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish*   • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish*   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Square Beading 15mm x 15mm

Solid Walnut Square Beading 15mm x 15mm Solid Walnut Square Beading manufactured from the finest quality American Black Walnut and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax*   • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish*   • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish*   • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish*   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Square Beading 9mm x 9mm

Solid Walnut Square Beading 9mm x 9mm Solid Walnut Square Beading manufactured from the finest quality American Black Walnut and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax*   • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish*   • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish*   • Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish*   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Walnut Product in Oiled Finish Timber Specie Information • Specie: American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 20mm x 20mm

Solid Beech Square Beading 20mm x 20mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 20mm   • Profile Depth: 20mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 15mm x 15mm

Solid Beech Square Beading 15mm x 15mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 12mm x 12mm

Solid Beech Square Beading 12mm x 12mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 18mm x 18mm

Solid Beech Square Beading 18mm x 18mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Square Beading 9mm x 9mm

Solid Beech Square Beading 9mm x 9mm Solid Beech Square Beading manufactured from the finest quality Solid European Steamed Beech and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech Waxed: Soft Sheen Finish - Medium-brown wax*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Beech Product in Oiled Finish Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Sapele Square Beading 9mm x 9mm

Solid Sapele Square Beading 9mm x 9mm Solid Sapele Square Beading manufactured from the finest quality Solid African Sapele and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Sapele Square Beading 15mm x 15mm

Solid Sapele Square Beading 15mm x 15mm Solid Sapele Square Beading manufactured from the finest quality Solid African Sapele and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Sapele Square Beading 18mm x 18mm

Solid Sapele Square Beading 18mm x 18mm Solid Sapele Square Beading manufactured from the finest quality Solid African Sapele and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Sapele Square Beading 20mm x 20mm

Solid Sapele Square Beading 20mm x 20mm Solid Sapele Square Beading manufactured from the finest quality Solid African Sapele and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 20mm   • Profile Depth: 20mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Sapele Square Beading 12mm x 12mm

Solid Sapele Square Beading 12mm x 12mm Solid Sapele Square Beading manufactured from the finest quality Solid African Sapele and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full solid timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One solid piece - no lamination   Finish Options  • Sapele Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Sapele Lacquered: Satin finish - One coat of clear lacquer and medium brown wax*   • Sapele Oiled: Matt Finish - one coat of light golden oil*   • Sapele Waxed: Soft Sheen Finish - Medium-brown wax*   • Sapele White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Sapele product in Oiled Finish Timber Specie Information • Specie: Solid African Sapele   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Pine Square Beading 18mm x 18mm

Pine Square Beading 18mm x 18mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Beading 18mm x 18mm

Solid Oak Square Beading 18mm x 18mm Solid Oak Square Beading manufactured from the finest quality American Oak and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Profile Height: 18mm   • Profile Depth: 18mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 21mm x 21mm

Pine Square Beading 21mm x 21mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 21mm   • Profile Depth: 21mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information •  Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 15mm x 15mm

Pine Square Beading 15mm x 15mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 12mm x 12mm

Pine Square Beading 12mm x 12mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Square Beading 9mm x 9mm

Pine Square Beading 9mm x 9mm Pine Square Beading manufactured from the finest quality Pine and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - Supplied as one full timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to three sides Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished Timber Specie Information • Specie: Pine (with untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Beading 25mm x 25mm

Solid Oak Square Beading 25mm x 25mm Solid Oak Square Beading manufactured from the finest quality American Oak and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Profile Height: 25mm   • Profile Depth: 25mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Beading 22mm x 22mm

Solid Oak Square Beading 22mm x 22mm Solid Oak Square Beading manufactured from the finest quality American Oak and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Profile Height: 22mm   • Profile Depth: 22mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Beading 9mm x 9mm

Solid Oak Square Beading 9mm x 9mm Solid Oak Square Beading manufactured from the finest quality American Oak and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Profile Height: 9mm   • Profile Depth: 9mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Beading 12mm x 12mm

Solid Oak Square Beading 12mm x 12mm Solid Oak Square Beading manufactured from the finest quality American Oak and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Profile Height: 12mm   • Profile Depth: 12mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Beading 20mm x 20mm

Solid Oak Square Beading 20mm x 20mm Solid Oak Square Beading manufactured from the finest quality American Oak and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Profile Height: 20mm   • Profile Depth: 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Square Beading 15mm x 15mm

Solid Oak Square Beading 15mm x 15mm Solid Oak Square Beading manufactured from the finest quality American Oak and is part of our square beading collection. Specification • Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Profile Height: 15mm   • Profile Depth: 15mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak Waxed: Soft Sheen Finish - Medium-brown wax*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to three sides     * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full square beading collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.