Solid Ash Torus Architrave Lengths

Solid Ash Torus Architrave Lengths Solid Ash Torus Architrave lengths are manufactured from the finest quality Solid North American Ash and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Beech Torus Architrave Lengths

Solid Beech Torus Architrave Lengths Solid Beech Torus Architrave lengths are manufactured from the finest quality European Steamed Beech and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Walnut Torus Architrave Lengths

Solid Walnut Torus Architrave Lengths Solid Walnut Torus Architrave lengths are manufactured from the finest quality American Black Walnut and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax*   • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax*   • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied*   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.    Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Pine Torus Architrave Lengths

Pine Torus Architrave Lengths Pine Torus Architrave lengths are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm    • Length Options: 2100mm - 3000mm - 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Oak Torus Architrave Lengths

Solid Oak Torus Architrave Lengths Solid Oak Torus Architrave lengths are manufactured from the finest quality American Oak and is part of our modern architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Length Options: 2100mm - 2400mm - 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1    • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full modern architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Pine Torus Dado Rail 3 Metre

Pine Torus Dado Rail 3 Metre Pine Torus Dado Rail is manufactured from the finest quality Pine and is part of our traditional dado rail collection. Specification • Height: 69mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished   • Product Size in Image: 69mm Dado shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional dado rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Torus Dado Rail 3 Metre

Solid Walnut Torus Dado Rail 3 Metre Solid Walnut Torus Dado Rail is manufactured from the finest quality American Black Walnut and is part of our traditional dado rail collection. Specification • Height: 69mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax*   • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish*   • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish*   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Walnut Product in Oiled Finish   • Product Size in Image: 69mm Dado shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional dado rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Torus Picture Rail 3 Metre

Pine Torus Picture Rail 3 Metre Pine Torus Picture Rail is manufactured from the finest quality Pine and is part of our traditional picture rail collection. Specification • Height: 69mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm • Construction: One solid piece - no lamination   Finish Options    • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Pine Product in Unfinished   • Product Size in Image: 69mm Picture Rail shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional picture rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Torus Picture Rail 3 Metre

Solid Walnut Torus Picture Rail 3 Metre Solid Walnut Torus Picture Rail is manufactured from the finest quality American Black Walnut and is part of our traditional picture rail collection. Specification • Height: 69mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax*   • Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish*   • Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish*   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Walnut Product in Oiled Finish   • Product Size in Image: 69mm Picture Rail shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional picture rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Torus Skirting 3 metre

  Solid Walnut Torus Skirting is manufactured from the finest quality American Black Walnut and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax*   • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax*   • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied*   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Torus Architrave Sets

Solid Walnut Torus Architrave Sets  Solid Walnut Torus Architrave sets are manufactured from the finest quality American Black Walnut and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Stained: Walnut Matt Finish - One coat of walnut stain, ready to apply a further protective finish including lacquer, oil or wax*   • Lacquered: Walnut Satin Finish - One coat of walnut stain, clear lacquer & medium brown wax*   • Oiled: Walnut Matt Finish - One coat of walnut stain & one coat of oil applied*   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Black Walnut   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Maple Torus Architrave Sets

Solid Maple Torus Architrave Sets  Solid Maple Torus Architrave sets are manufactured from the finest quality North American Maple and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Maple Lacquered: Gloss Finish - Two coats of clear lacquer*   • Maple Oiled: Matt Finish - one coat of light golden oil* • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Maple Torus Skirting 3 metre

Solid Maple Torus Skirting 3 Metre Solid Maple Torus Skirting is manufactured from the finest quality North American Maple and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Maple Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Maple Lacquered: Gloss Finish - Two coats of clear lacquer*   • Maple Oiled: Matt Finish - one coat of light golden oil*   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Maple   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Torus Architrave Sets

Solid Ash Torus Architrave Sets  Solid Ash Torus Architrave sets are manufactured from the finest quality Solid North American Ash and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options    • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 3 sides. Front face, left and right side • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Torus Skirting 3 metre

Solid Ash Torus Skirting 3 Metre Solid Ash Torus Skirting is manufactured from the finest quality Solid North American Ash and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint • Ash Lacquered: Gloss Finish - Two coats of clear lacquer* • Ash Oiled: Matt Finish - one coat of light golden oil* • Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain) • Selected Finish Option: Applied to 2 sides, front and top only • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid North American Ash   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Torus Architrave Sets

Solid Beech Torus Architrave Sets  Solid Beech Torus Architrave sets are manufactured from the finest quality Solid European Steamed Beech and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness Options: 15mm - 18mm - 20mm   • Construction: One solid piece - no lamination   Finish Options    • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Beech Torus Skirting 3 metre

  Solid Beech Torus Skirting is manufactured from the finest quality Solid European Steamed Beech and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Beech Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Beech Lacquered: Gloss Finish - Two coats of clear lacquer*   • Beech Oiled: Matt Finish - one coat of light golden oil*   • Beech White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid European Steamed Beech   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Torus Skirting 3.5 metre

  Pine Torus Skirting is manufactured from Pine and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3500mm - Supplied as one full timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots)   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 5-6 screws/pellets are recommended for this length, sold separately. Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Pine Torus Door Architrave Sets

Pine Torus Architrave Sets  Pine Torus Architrave sets are manufactured from the finest quality Pine and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint   • Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Pine (Grade A with minimal untreated knots) • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Torus Skirting Board 3 metre

  Solid Oak Torus Skirting Board is manufactured from the finest quality American Oak and is part of our traditional skirting collection. Specification • Height Options: 50mm - 69mm - 95mm - 119mm - 145mm - 169mm - 195mm - 219mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm   • Cable Rebate Option: 10mm x 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 2 sides, front and top only   • Out of Sight: The back and bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board height • Cable rebate: Section cut out of the rear bottom section of the skirting board to conceal cables or pipes. The cut out size is 20mm high x 10mm depth • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: CGI (Computer Generated Image)   • Product size in image: 119mm high skirting shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional skirting range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Torus Door Architrave Sets

  Manufactured from the finest quality American Oak and is part of our traditional architrave collection. Specification • Width Options: 50mm - 69mm - 95mm - 119mm   • Single Door Set: 2 x 2100mm + 1 x 1000mm pieces in each set, this covers one side of a single door   • Double Door Set: 3 x 2100mm pieces in each set, this covers one side of a double door   • Thickness: 20mm   • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, left and right side   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile, which does not change regardless of the board width • Storage: Flat and Dry Only • Pack Quantity: 1 - Each set covers one side of the door   • Product Image Information: CGI (Computer Generated Image)   • Product Size in Image: 69mm wide architrave shown in product image, to view all sizes and profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit to glue the 45 degree cuts. These are sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional architrave range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Torus Dado Rail 3 Metre

Solid Oak Torus Dado Rail 3 Metre Solid Oak Torus Dado Rail is manufactured from the finest quality American Oak and is part of our traditional dado rail collection. Specification • Height: 69mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish   • Product Size in Image: 69mm Dado shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional dado rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.

Solid Oak Torus Picture Rail 3 Metre

Solid Oak Torus Picture Rail 3 Metre Solid Oak Torus Picture Rail is manufactured from the finest quality American Oak and is part of our traditional picture rail collection. Specification • Height: 69mm   • Length: 3000mm - Supplied as one full solid timber length   • Thickness: 20mm • Construction: One solid piece - no lamination   Finish Options  • Oak Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint   • Oak Lacquered: Golden brown satin finish - One coat of clear lacquer and medium brown wax*   • Oak Oiled: Matt finish - One coat of light golden oil*   • Oak White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)   • Selected Finish Option: Applied to 3 sides. Front face, top and bottom   • Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options   * These finishes are for internal use only and are not recommended to be used in water exposed areas.  Technical Information • Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm  • Profile Information: Refer to our technical image for details and guidance on the profile • Storage: Flat and Dry Only • Pack Quantity: 1   • Product Image Information: Solid Oak Product in Oiled Finish   • Product Size in Image: 69mm Picture Rail shown in product image for illustration, to view profile coverage refer to technical image Timber Specie Information • Specie: Solid American Oak   • Variation: There will be a difference in each piece due to being manufactured from natural timber Installation • Fitting: This product will need to be installed by a qualified professional • Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.  Samples, Matching Products & Further Information  • Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE* • Full traditional picture rail range collection: Available HERE • Matching Products: Available HERE • Dimensions & measurements: Guide HERE • Timber specie: Information HERE *Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish. Lead Times, Delivery & Collection Information • Delivery & Collection times vary across our product ranges.  View the Delivery & Returns section on this page for detailed up to date information.