from LoveSkirting

Pine Kensington Dado Rail 2.4 Metre

Thu, 08 Oct 2026 02:05:04 +0100

Pine Kensington Dado Rail is manufactured from the finest quality Pine and is part of our traditional dado rail collection.

Specification

• Height: 69mm

• Length: 2400mm - Supplied as one full solid timber length

• Thickness: 28mm

• Construction: Laminated

Finish Options

• Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint

• Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)

• Selected Finish Option: Applied to 3 sides. Front face, top and bottom

• Out of Sight: The back of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Pine Product in Unfinished

• Product Size in Image: 69mm Dado shown in product image for illustration, to view profile coverage refer to technical image

Timber Specie Information

• Specie: Pine (Grade A with minimal untreated knots)

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads - 4-5 screws/pellets are recommended for this length, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full traditional dado rail range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M20 - 34mm x 12mm

Thu, 08 Oct 2026 02:05:04 +0100

Pine Panel Moulding M20 - 34mm x 12mm

Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection.

Specification

• Length Options: 1000mm - 2400mm - Supplied as one full timber length

• Thickness: 34mm

• Width: 12mm

• Construction: Laminated

Finish Options

• Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint

• Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: CGI (Computer Generated Image)

Timber Specie Information

• Specie: Pine (with untreated knots)

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full decorative panel moulding collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M19 - 21mm x 9mm

Thu, 08 Oct 2026 16:33:28 +0100

Pine Panel Moulding M19 - 21mm x 9mm

Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection.

Specification

• Length Options: 1000mm - 2400mm - Supplied as one full timber length

• Thickness: 21mm

• Width: 9mm

• Construction: Laminated

Finish Options

• Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint

• Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: CGI (Computer Generated Image)

Timber Specie Information

• Specie: Pine (with untreated knots)

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full decorative panel moulding collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Pine Panel Moulding M18 - 29mm x 15mm

Thu, 08 Oct 2026 02:05:04 +0100

Pine Panel Moulding M18 - 29mm x 15mm

Pine Panel Moulding manufactured from the finest quality Pine and is part of our decorative moulding collection.

Specification

• Length Options: 1000mm - 2400mm - Supplied as one full timber length

• Thickness: 15mm

• Width: 29mm

• Construction: Laminated

Finish Options

• Pine Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain or paint

• Pine White Primed: One coat of white primer applied, will require additional coats of protective paint (ONLY suitable for painting)

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: CGI (Computer Generated Image)

Timber Specie Information

• Specie: Pine (with untreated knots)

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full decorative panel moulding collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Walnut Cushion Moulding 18mm x 18mm

Thu, 08 Oct 2026 02:05:04 +0100

Solid Walnut Cushion Moulding 18mm x 18mm

Solid Walnut Cushion Moulding is manufactured from the finest quality American Black Walnut and is part of our cushion moulding collection.

Specification

• External Size: 18mm x 18mm*

• Length Options: 1000mm - 2400mm - Supplied as one full solid timber length

• Thickness: 4mm

• Construction: One solid piece - no lamination

*For information on the internal size dimensions please refer to our technical image

Finish Options

• Walnut Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Walnut Stained: One coat of walnut stain, matt finish, ready to apply a further protective finish including lacquer, oil or wax*

• Walnut Lacquered: One coat of walnut stain & clear lacquer & medium brown wax, medium/dark walnut satin finish*

• Walnut Oiled: One coat of walnut stain & one coat of oil applied, matt finish*

• Walnut Waxed: One coat of walnut stain & Medium-brown wax applied, soft sheen finish*

• Selected Finish Option: Applied to 2 external sides

• Out of Sight: The internal 2 sides of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Walnut Product in Oiled Finish

Timber Specie Information

• Specie: American Black Walnut

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full cushion moulding range collection: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Ash Scotia Beading 15mm x 15mm

Thu, 08 Oct 2026 02:05:04 +0100

Solid Ash Scotia Beading 15mm x 15mm

Solid Ash Scotia Beading manufactured from the finest quality North American Ash and is part of our scotia beading collection.

Specification

• Length Options: 1000mm - 2400mm - Supplied as one full solid timber length

• Profile Height: 15mm

• Profile Depth: 15mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Ash White Primed: Ready to paint - One coat of white primer applied, will require additional coats of protective paint (only suitable for painting, primer cannot be sanded off to apply lacquer or stain)

• Selected Finish Option: Applied to the front curvature

• Out of Sight: The back and bottom of this product will not be visible when installed, therefore are not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using suitable panel pins and optional Mitre Fast Bonding Kit. These are sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full scotia beading collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Square Edge Beading Strip 170mm x 7mm

Wed, 01 Apr 2026 02:05:03 +0100

Solid Ash Flat Square Edge Beading Strip 170mm x 7mm

Solid Ash Flat Square Edge Beading Strip manufactured from the finest quality Solid North American Ash and is part of our flat square edge beading collection.

Specification

• Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness: 7mm

• Width: 170mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to the top face and the 2 small sides

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flat square edge beading collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Square Edge Beading Strip 150mm x 7mm

Tue, 17 Mar 2026 02:05:02 +0000

Solid Ash Flat Square Edge Beading Strip 150mm x 7mm

Solid Ash Flat Square Edge Beading Strip manufactured from the finest quality Solid North American Ash and is part of our flat square edge beading collection.

Specification

• Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness: 7mm

• Width: 150mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to the top face and the 2 small sides

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flat square edge beading collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Square Edge Beading Strip 160mm x 7mm

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Flat Square Edge Beading Strip 160mm x 7mm

Solid Ash Flat Square Edge Beading Strip manufactured from the finest quality Solid North American Ash and is part of our flat square edge beading collection.

Specification

• Length Options: 1000mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness: 7mm

• Width: 160mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to the top face and the 2 small sides

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 40mm beading shown in product image for illustration, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using suitable panel pins and optional Gun A Nail Extra Adhesive. These are sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flat square edge beading collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Morrells Touch up Wax - 50ML

Thu, 08 Oct 2026 02:05:04 +0100

Morrells Touch up Wax - 50ML

Morrells Touch Up Wax - 50ml

Morrells MorWax Medium Brown Wax.

Specification

Formulated to produce a smooth and durable coating. Suitable for use on all interior wooden surfaces, such as doors, windows, skirting and architraves.

Application

Apply the wax sparingly to the surface with a soft lint-free cloth, ensuring the wax is rubbed along the grain. After 15 minutes, polish with a soft dry lint-free cloth.

Maintenance

Build up of discoloured wax over time can be removed by lightly washing with white spirit. Finish products should not be subjected to temperatures below 2 degrees celsius.

Drying Time

10 minutes.

Coverage

10m² per litre.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full Finishing Collection: Available HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Solid Ash Square Edge Door Threshold 110mm Wide

Fri, 19 Jun 2026 02:05:02 +0100

Solid Ash Square Edge Door Threshold 110mm Wide

Solid Ash Square Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 110mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Edge Door Threshold 110mm Wide

Thu, 08 Oct 2026 02:05:04 +0100

Solid Ash Flat Edge Door Threshold 110mm Wide

Solid Ash Flat Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 120mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Edge Door Threshold 220mm Wide

Thu, 03 Sep 2026 02:05:02 +0100

Solid Ash Flat Edge Door Threshold 220mm Wide

Solid Ash Flat Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 220mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Edge Door Threshold 210mm Wide

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Flat Edge Door Threshold 210mm Wide

Solid Ash Flat Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 210mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Edge Door Threshold 200mm Wide

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Flat Edge Door Threshold 200mm Wide

Solid Ash Flat Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 200mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Edge Door Threshold 190mm Wide

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Flat Edge Door Threshold 190mm Wide

Solid Ash Flat Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 190mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Edge Door Threshold 180mm Wide

Thu, 18 Jun 2026 02:05:02 +0100

Solid Ash Flat Edge Door Threshold 180mm Wide

Solid Ash Flat Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 180mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Edge Door Threshold 170mm Wide

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Flat Edge Door Threshold 170mm Wide

Solid Ash Flat Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 170mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Flat Edge Door Threshold 160mm Wide

Thu, 08 Oct 2026 02:05:04 +0100

Solid Ash Flat Edge Door Threshold 160mm Wide

Solid Ash Flat Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 160mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Edge Door Threshold 220mm Wide

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Square Edge Door Threshold 220mm Wide

Solid Ash Square Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 220mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Edge Door Threshold 210mm Wide

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Square Edge Door Threshold 210mm Wide

Solid Ash Square Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 210mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Edge Door Threshold 200mm Wide

Fri, 19 Jun 2026 02:05:02 +0100

Solid Ash Square Edge Door Threshold 200mm Wide

Solid Ash Square Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 200mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Edge Door Threshold 190mm Wide

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Square Edge Door Threshold 190mm Wide

Solid Ash Square Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 190mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.

Solid Ash Square Edge Door Threshold 180mm Wide

Tue, 11 Nov 2025 14:07:18 +0000

Solid Ash Square Edge Door Threshold 180mm Wide

Solid Ash Square Edge Door Threshold manufactured from the finest quality Solid North American Ash and is part of our flooring threshold collection.

Specification

• Length Options: 900mm – 1000mm - 1600mm - 2400mm - 3000mm - Supplied as one full solid timber length

• Thickness Options: 12mm – 15mm – 18mm - 20mm

• Width: 180mm

• Construction: One solid piece - no lamination

Finish Options

• Ash Unfinished: Pre-sanded - Ready to apply a protective finish including lacquer, stain, oil, wax or paint

• Ash Lacquered: Gloss Finish - Two coats of clear lacquer*

• Ash Oiled: Matt Finish - one coat of light golden oil*

• Ash Waxed: Soft Sheen Finish - Medium-brown wax*

• Selected Finish Option: Applied to 3 sides. Top face, left and right side

• Out of Sight: The bottom of this product will not be visible when installed, therefore is not sanded or finished with any of the above options

* These finishes are for internal use only and are not recommended to be used in water exposed areas.

Technical Information

• Product Sizes: This product is finished and supplied in the sizes stated +/- 1-2mm

• Profile Information: Refer to our technical image for details and guidance on the profile

• Storage: Flat and Dry Only

• Pack Quantity: 1

• Product Image Information: Solid Ash Product in Oiled Finish

• Product Size in Image: 95mm x 20mm threshold shown in product image, to view profile refer to technical image

Timber Specie Information

• Specie: Solid North American Ash

• Variation: There will be a difference in each piece due to being manufactured from natural timber

Installation

• Fitting: This product will need to be installed by a qualified professional

• Materials: Must be installed using screws and optional matching timber pellets to cover the screw heads

• Screw and Pellet Recommendation Per Length:

0.9m & 1.0m = 2-3 screws/pellets - 1.6m = 3-4 screws/pellets - 2.4m = 4-5 screws/pellets - 3.0m = 5-6 screws/pellets, sold separately.

Samples, Matching Products & Further Information

• Product Samples: Can be purchased for £2-3 each with free delivery. For more information regarding our sample service click HERE*

• Full flooring threshold range collection: Available HERE

• Matching Products: Available HERE

• Dimensions & measurements: Guide HERE

• Timber specie: Information HERE

*Please note that our samples are primarily used to show the profile and finish of our products, they are sent out in standard sizes along with a swatch to show the timber and finish.

Lead Times, Delivery & Collection Information

• Delivery & Collection times vary across our product ranges. View the Delivery & Returns section on this page for detailed up to date information.